hows it going, I’m in a little sunken ship at the moment, I have a 06 g36 6mt, my motor started knocking due to my stupidity and lack of checking my oil when needs to be filled. So now my bottom end is toast due to my rod bearings deteriorating. I found locally a non revup 6mt motor from an 04 and was wondering what is needed to be done to swap over the non revup, I’m guessing the ecu and the engine harness, now I know I can always swap out the non rev block to the revup heads and call it a day, but to be honest I’m not in the mood to take apart 2 motors right now, rather just swap and call it a day. So what exactly do I need from the 04 donor car to make this work?
I have searched and searched this forum and 350z forums, literally everywhere. Thanks in advance.