No Idle but Revs 2500-5000 after jumpstart
No Idle but Revs 2500-5000 after jumpstart
everything was fine when I last drove my 05 G35, then it sat for probably a month or so due to weather and getting another vehicle...
about a week ago went to start it and it needed to be jumped started, drove it around a little bit then put it on the charger, later in the afternoon it started fine drove it a little bit and parked it again. just went to drive it and it needed to be jumped again... except this time when I jumpstarted it - it went straight to revving form about 2500-5000rpms... no idle... I do have an OBDII reader connected to the car and it didn't show any codes... I turned off the car and tried to restart it, had to jump it again and straight to revving again....
I searched and found only 1 related thread - difference was he disconnect battery, didn't need a jump start and his vehicle would idle for a little bit before revving 1000-2500rpms...
https://g35driver.com/forums/engine-...ease-help.html
any help greatly appreciated
about a week ago went to start it and it needed to be jumped started, drove it around a little bit then put it on the charger, later in the afternoon it started fine drove it a little bit and parked it again. just went to drive it and it needed to be jumped again... except this time when I jumpstarted it - it went straight to revving form about 2500-5000rpms... no idle... I do have an OBDII reader connected to the car and it didn't show any codes... I turned off the car and tried to restart it, had to jump it again and straight to revving again....
I searched and found only 1 related thread - difference was he disconnect battery, didn't need a jump start and his vehicle would idle for a little bit before revving 1000-2500rpms...
https://g35driver.com/forums/engine-...ease-help.html
any help greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Ouija
Engine, Drivetrain & Forced-Induction
7
Jan 19, 2013 02:35 AM
alliedtech
Engine, Drivetrain & Forced-Induction
4
Jan 28, 2009 05:40 PM
maomao
Engine, Drivetrain & Forced-Induction
6
Dec 21, 2008 06:46 PM



