REAL VDC mod, perhaps???
Joined: Feb 2005
Posts: 2,015
Likes: 7
From: Santa Barbara, Ca
REAL VDC mod, perhaps???
I was kinda thinking for quicker VDC on/off switch for the MT...
MAYBE...
you know how for Reverse gear, you need to press down on the **** and then move over to "R"?...
Well... have a contact switch on the shifter housing for "VDC off" when the contacts meet... and then "VDC on" when you press the **** down again...
Bad part is that whenever you go in reverse, you turn VDC "OFF"...
am i making sense?
MAYBE...
you know how for Reverse gear, you need to press down on the **** and then move over to "R"?...
Well... have a contact switch on the shifter housing for "VDC off" when the contacts meet... and then "VDC on" when you press the **** down again...
Bad part is that whenever you go in reverse, you turn VDC "OFF"...
am i making sense?
Originally Posted by ainsley
Sounds complex. I think I'd stick with KP Technologies' offering.
with the kptech vdc mod you can turn it off and on whenever you want.
if you would rather turn it off when you want then that is the way it works from the factory.
you could extend it but you would still need to use the same type of switch that the factory one is.
if you would rather turn it off when you want then that is the way it works from the factory.
you could extend it but you would still need to use the same type of switch that the factory one is.
Trending Topics
actually the VDC switch is pretty simple.
There are 4 wires
2 wires are for the light in it
2 are for the VDC on/off - one is ground. It is a simple momentary to ground.
So to move it really only requires one lead + ground (assuming you don't need the light)
There are 4 wires
2 wires are for the light in it
2 are for the VDC on/off - one is ground. It is a simple momentary to ground.
So to move it really only requires one lead + ground (assuming you don't need the light)
It is as easy as that, 4 wires to extend. I did the same mod a long time ago. I do not know about the '05 but the '03 & '04 have a spot that is easy to cut from the center council. It was like it was designed to fit there. You can order a blank to fit in where you took the VDC button.
Thread
Thread Starter
Forum
Replies
Last Post



