FS: TopSpeed Pro1 TRUE DUAL, my lost your gain
FS or WTT: TopSpeed Pro1 TRUE DUAL
I just got these on 2/09/11.
Only ran 50 miles, no damage on them.
I want a different set up so I dont want this. there is nothing wrong with them.
You will need to buy your own bolts and gasket.
When the package was open
Installed. only ran 50 miles so far.
Had fitment issue is because i installed it wrong. And was too lazy to fix it.
'
More information on this exhaust http://www.topspeedauto.com/ProductC...idproduct=2218
I can do trades as well. I can lower your price if you give me Test Pipes or Y-Pipe or BOTH.
Only ran 50 miles, no damage on them.
I want a different set up so I dont want this. there is nothing wrong with them.
You will need to buy your own bolts and gasket.
When the package was open
Installed. only ran 50 miles so far.
Had fitment issue is because i installed it wrong. And was too lazy to fix it.
The installer probably tighten the bolts on driver side and move on to passenger side this is why the passenger side exhaust is almost touching the bumper and is at higher position.
Kevin,
That exhaust shop made a very common mistake on installation, specially on dual exhaust set up.
The issue are caused the installer tighten the bolts on one side exhaust and moved on to other side, which will caused exhaust not line up due to stress are leaning toward the exhaust side that was tighten first.
You will need to loosen the bolts on both side exhaust, tighten the bolts on flange in rotation and have someone stand behind the car and guide you the position. This way the exhaust will be perfectly line up. Please make sure to revise you review after you had the issue corrected.
This is Top Speed Dual Exhaust Installation notes:
For All TOP SPEED PRO-1 Dual Exhaust Systems:
Special note for exhaust installation on the rear section exhaust installation, if you tighten the nuts&bolts on the exhaust on one side and move on to the other side the exhaust on left and right will not line up evenly and will be off in position.
Please tighten the nuts&bolts in rotation, right -> left -> right -> left and adjust the position of exhaust & exhaust hangers before tighten both side exhaust nuts&bolts.
For best results have a helper to stand behind the rear of your car to visually direct you to perfect installation.
Thank you for using TOP SPEED PRO-1 Exhaust System & Enjoy !
Kevin,
That exhaust shop made a very common mistake on installation, specially on dual exhaust set up.
The issue are caused the installer tighten the bolts on one side exhaust and moved on to other side, which will caused exhaust not line up due to stress are leaning toward the exhaust side that was tighten first.
You will need to loosen the bolts on both side exhaust, tighten the bolts on flange in rotation and have someone stand behind the car and guide you the position. This way the exhaust will be perfectly line up. Please make sure to revise you review after you had the issue corrected.
This is Top Speed Dual Exhaust Installation notes:
For All TOP SPEED PRO-1 Dual Exhaust Systems:
Special note for exhaust installation on the rear section exhaust installation, if you tighten the nuts&bolts on the exhaust on one side and move on to the other side the exhaust on left and right will not line up evenly and will be off in position.
Please tighten the nuts&bolts in rotation, right -> left -> right -> left and adjust the position of exhaust & exhaust hangers before tighten both side exhaust nuts&bolts.
For best results have a helper to stand behind the rear of your car to visually direct you to perfect installation.
Thank you for using TOP SPEED PRO-1 Exhaust System & Enjoy !
More information on this exhaust http://www.topspeedauto.com/ProductC...idproduct=2218
I can do trades as well. I can lower your price if you give me Test Pipes or Y-Pipe or BOTH.
Last edited by _; Feb 12, 2011 at 04:15 AM.
Im taking all the parts out this weekend and it will be ready to be shipped. Local buyers is welcome to pick up in houston.
I can also upload a vid of how it sounds like on my set up.
I can also upload a vid of how it sounds like on my set up.
I can do trades as well. I can lower your price if you give me Test Pipes or Y-Pipe or BOTH.
Trending Topics
As per forum rules, please include a picture with a handwritten sign with your screen name and the date. Once you're ready with that, PM me and I'll reopen the thread.
We just need to be sure that what you're selling is in your possession.
We just need to be sure that what you're selling is in your possession.
Thread
Thread Starter
Forum
Replies
Last Post
VatoVazq
Steering & Suspension
16
Jan 3, 2025 11:08 PM
thechitoguy
G35 Sedan V35 2003-06
12
Oct 1, 2015 05:25 PM
