OEM G35 Rev-Up Lower Collector

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jun 19, 2010 | 05:11 PM
  #1  
bythabay's Avatar
Thread Starter
|
Registered User
iTrader: (5)
Joined: May 2005
Posts: 2,174
Likes: 77
From: Santa Clara, CA
OEM G35 Rev-Up Lower Collector

This is a used lower collection from a 2007 G35 Coupe 6MT. Should fit any 1st generation G35/350z. I removed it from the car after it was originally on there, and have kept it in clean storage bubble wrapped ever since.

power boost for your non-rev-up motor or maybe you're going back to stock?

$175 OBO

-Eugene
415-830-4008
 

Last edited by bythabay; Jun 28, 2010 at 08:46 PM.
Reply
Old Jun 28, 2010 | 08:44 PM
  #2  
DallasD's Avatar
Registered User
Joined: Jun 2010
Posts: 52
Likes: 0
From: Ocala, Fl
How do i tell if I have a non-rev-up motor? I have an 04 g35 sedan.
 
Reply
Old Jun 28, 2010 | 08:45 PM
  #3  
bythabay's Avatar
Thread Starter
|
Registered User
iTrader: (5)
Joined: May 2005
Posts: 2,174
Likes: 77
From: Santa Clara, CA
Originally Posted by DallasD
How do i tell if I have a non-rev-up motor? I have an 04 g35 sedan.
rev-ups were only made between 05 and 07. The rev-up motors are rated at 298HP
 
Reply
Old Jun 28, 2010 | 08:50 PM
  #4  
DallasD's Avatar
Registered User
Joined: Jun 2010
Posts: 52
Likes: 0
From: Ocala, Fl
So if I put this on my 04 i will make more hp?
 
Reply
Old Jun 28, 2010 | 08:52 PM
  #5  
bythabay's Avatar
Thread Starter
|
Registered User
iTrader: (5)
Joined: May 2005
Posts: 2,174
Likes: 77
From: Santa Clara, CA
Originally Posted by DallasD
So if I put this on my 04 i will make more hp?
can't say for sure. I would check the forums and see what folks say. I just know I have an unit here I am trying to sell
 
Reply
Old Jun 28, 2010 | 08:53 PM
  #6  
DallasD's Avatar
Registered User
Joined: Jun 2010
Posts: 52
Likes: 0
From: Ocala, Fl
Ok thanks for the info.
 
Reply
Old Jun 28, 2010 | 08:54 PM
  #7  
bythabay's Avatar
Thread Starter
|
Registered User
iTrader: (5)
Joined: May 2005
Posts: 2,174
Likes: 77
From: Santa Clara, CA
according to this site:

http://www.chicagoz.com/forums/archi...p?t-13924.html

the 05-07 plenums are improved over the earlier versions in terms of flow characteristics
 
Reply
Old Jun 28, 2010 | 08:58 PM
  #8  
DallasD's Avatar
Registered User
Joined: Jun 2010
Posts: 52
Likes: 0
From: Ocala, Fl
Oh yeah not really wanting to lose bottom end though thats whereI need the most help.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Exterior - Body Parts CDN
2
Aug 21, 2015 09:50 AM
Buggzb86
Drivetrain
0
Jul 25, 2015 11:22 PM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:01 AM.