*NEW* Turbonetics G35 Single Turbo Kit
..the intercooler isn't directional, and taking off the fans with that bumper would be your best bet.
..some of the 350z guys have wrapped their aftermarket headers without a problem. There's a long discussion over my350z talking about the quality of metals used to cast the stock headers vs the crawford headers. I believe the outcome was that the stock headers could handle the heat better than the aftermarket ones.
..from what I've seen of the awd sedan I don't think this kit will be an issue to install. The downpipe to mid pipe location looks similar, brackets, piping, all look good for clearance, but then I've never taken a tape measure out so...
...400whp isn't a very far reach with this kit.... I think the thing that limits this kit the most is the TS flash used for management... its hit or miss.
..some of the 350z guys have wrapped their aftermarket headers without a problem. There's a long discussion over my350z talking about the quality of metals used to cast the stock headers vs the crawford headers. I believe the outcome was that the stock headers could handle the heat better than the aftermarket ones.
..from what I've seen of the awd sedan I don't think this kit will be an issue to install. The downpipe to mid pipe location looks similar, brackets, piping, all look good for clearance, but then I've never taken a tape measure out so...
...400whp isn't a very far reach with this kit.... I think the thing that limits this kit the most is the TS flash used for management... its hit or miss.
i know people have gotten close to 400whp, but whats the MAX limit on this kit stock, if the reflash and the enginer internals wasnt an issue. What if an emanage ultimate was used? what would be the max boost and whp that this kit can be used for? TNectics or APS i dunno!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!
Hey Escobar,
Edit: Actually, the kit will not work on the 05 due to the CVTCS. The programming will obviously be different and the engine is actually positioned the slightest bit different where Turbonetics will have to re-check the piping, etc...
Sorry if anyone was mislead. I was going by what Turbonetics was telling me.
Jesse @ Turbo Kits.com
Edit: Actually, the kit will not work on the 05 due to the CVTCS. The programming will obviously be different and the engine is actually positioned the slightest bit different where Turbonetics will have to re-check the piping, etc...
Sorry if anyone was mislead. I was going by what Turbonetics was telling me.
Jesse @ Turbo Kits.com
Originally Posted by escobar929
Jesse,
sorry to keep asking the same questions over and over, but can you give us a little more info about what has been done so that this kit will fit an 05 6MT. As was a part of a vortech GB and i was guaranteed (by vortech)that the kit will fit, but as it turns out it didnt. its hard for me to accept a simple "yes" this time.
sorry to keep asking the same questions over and over, but can you give us a little more info about what has been done so that this kit will fit an 05 6MT. As was a part of a vortech GB and i was guaranteed (by vortech)that the kit will fit, but as it turns out it didnt. its hard for me to accept a simple "yes" this time.
Last edited by TurboKits.com; Oct 11, 2005 at 12:16 PM.
The official release should be at SEMA this year and they will start shipping shorty after that...
Jesse @ Turbo Kits.com
Jesse @ Turbo Kits.com
Originally Posted by lucidazn
When will it be released?
Cool, PM me your cell phone and we'll meet 
Jesse @ Turbo Kits.com
P.S. Keep the Questions Coming All!
Jesse @ Turbo Kits.com
P.S. Keep the Questions Coming All!
Originally Posted by PhxBlue
Sema really? I am going to Sema this year, I cant wait!
People that decide on using different engine managment, shouldn't have to worry if they have an '05 with the new REVUP engine. People that are going to stay with the Technosquare flash are the ones that will have to wait. It will still work if they decide to go with a custom flash instead of the standard flash. From what I've heard, the only piping issue should be on the intake portion of the turbo where it comes near the frame. That is fixed by loosening the bolts of the compressor and rotating it to fit. I believe there was a slight issue with some of the 04's, which has been slightly enhanced in the 05's. Worst scenario, they have to tap the frame a little in that area.
Unfortunately the only way around this is what 2slo2bfurious stated. However, a small price to pay for the single turbo set up
Hmmmm.... Turbo (in Homer Simpson Voice).
Jesse @ Turbo Kits.com
Hmmmm.... Turbo (in Homer Simpson Voice).
Jesse @ Turbo Kits.com
Originally Posted by vipv35
this sux. i want to go single turbo but nothing is coming out for 05s that is convenient enough. 
Originally Posted by turbokitscom
Unfortunately the only way around this is what 2slo2bfurious stated. However, a small price to pay for the single turbo set up
Hmmmm.... Turbo (in Homer Simpson Voice).
Jesse @ Turbo Kits.com
Hmmmm.... Turbo (in Homer Simpson Voice).
Jesse @ Turbo Kits.com
Yes and the minor tweaks to the piping.
I would be more than happy to discount an eManage and add it to the kit for anyone who would like to take this route.
Jesse @ Turbo Kits.com
I would be more than happy to discount an eManage and add it to the kit for anyone who would like to take this route.
Jesse @ Turbo Kits.com
Originally Posted by escobar929
oh ok, so the only thing that will not work is the TS reflash. which doesnt matter to me since i wanna go w/ a GReddy e-Manage Ultimate from the get go.