Whatz up guyz.. i've had my G coupe for a lil over a month.. ill also be payin my dues for the florida G club this week.. Does anyone know where i would be able to get my skunk2 plenum installed.. i dont have all the tools to do it myself...

 

where are you at in tampa?
its not that bad to do, just need a 10mm wrench.

 

im on waters ave.. by town and country.. a block away from anderson rd... i tried doin it myself.. but i didnt have the tools to take off the throttle body.. so just gave up for now..

 

Welcome. Put some pics up of the G

 

I think those bolts are socket heads so u need to get some allen wrenches and a pliers. OR u can buy a case of beer and ask SFLG35 do it for u.

 

SFLG35 what kinda beer u drink? lol

 

for a spacer, you do not need to take the throttle body off. just unbolt the upper plenum, lift it up and slide the spacer in then bolt it back down.

just bring it with you on wednesday night, ill try to get you there depending on my class times.

 

is that it? so i dont need to take out the intake ? what about the coolant lines.. i brough an elbow connector to join the 2 lines

 

just unplug the lines and put them together with the connector. i would also cap the ends of the ones that are on the plenum.

 

Just make sure you get all the gaskets straight and flat so you don't create a leak.

It's easy to mess them up sliding a spacer between the upper and lower plenum.

 

thanx for the tip.. but on the instructions it tells me to remove the gaskets... that they're not needed wit the plenum..