DYNO DAY, Aug. 27th at Next Level Performance...
#106
Draco, It is really easy and you can watch a bunch of other people dyno first.
Here's how it works.
1. You give your keys to the dyno operator.
2. They back your car up onto the dyno and press a button on a hydraullic lift.
3. Car goes up into the air about 4 feet and then they back the rear wheels up onto a steel drum.
4. They attach straps to the back of your car to keep your car stationary and then they begin to do the dyno run.
5. They start out in 1st gear, get to ~2,500-3,000 rpms and shift into second... repeat this until you get to 4th gear for the 5AT's or 5th gear for the 6MT's.
6. At about 2500 rpm's they floor the car and take it up until you tell them to stop. Most people take it to the rev limiter.
There is a computer hooked up to the dyno and it prints out your graph. You don't have to do anything, the dyno operator does everything for you.
Here's how it works.
1. You give your keys to the dyno operator.
2. They back your car up onto the dyno and press a button on a hydraullic lift.
3. Car goes up into the air about 4 feet and then they back the rear wheels up onto a steel drum.
4. They attach straps to the back of your car to keep your car stationary and then they begin to do the dyno run.
5. They start out in 1st gear, get to ~2,500-3,000 rpms and shift into second... repeat this until you get to 4th gear for the 5AT's or 5th gear for the 6MT's.
6. At about 2500 rpm's they floor the car and take it up until you tell them to stop. Most people take it to the rev limiter.
There is a computer hooked up to the dyno and it prints out your graph. You don't have to do anything, the dyno operator does everything for you.
#110
#112
Charter Member Florida G35 Club
iTrader: (1)
Joined: Dec 2003
Posts: 1,577
Likes: 0
From: Orlando, FL
Originally Posted by djniknala
Man you guys are too much. You would probably puke if you saw what my car looks like monday through friday. The weekend it gets cleaned. High horsepower and test pipes=dirty car from carbon. On a side note I have the new injectors and I am going to start tuning using these(15psi). At the very worst I will make a low psi run(10psi) at the dyno day but I am going to run regardless. Sean you have pm.
Alan
Alan
#113
Charter Member Florida G35 Club
iTrader: (1)
Joined: Dec 2003
Posts: 1,577
Likes: 0
From: Orlando, FL
Originally Posted by Draco24433
Thanks Neffter! By the way, I just paid thru paypal for the Dyno Day.
Originally Posted by SweetNlow
Im in the area. I drove down from colorado. I'll be able to attend if thats kool?
#114
bump...added draco to the list. Thanks draco for coming out to our dyno day!
From our club -
I'm dynoing:
1. Demonteverde321
2. 98intrigue PAID
3. Chazm
4. FLFire PAID 9:00 PAID spot reserved
5. DJNiknala (GReddy TT)
6. Draco24433 (ATI Procharger) PAID
7. Neffster - tentative
8. Stpdevil - tentative
I'm not dynoing, I just want to watch:
1. G35Sean
2. C-Keith
3. chuckkrugiii
4. Gee pasta
5. Omi
6. SFLG35
From Ozoc -
I'm dynoing:
1. ZUL8TR - 350Z (nitrous)
2. SuperRoadster -350Z (HKS supercharger)
3. A2Z - 350Z (Greddy TT )
4. Phil
I'm not dynoing, I just want to watch:
1. CESAROTORRES - APS TT
2. Manny
3. JDMonster - 300zx
4. Sweetnlow-6mt 05
From Next Level Performance customers:
I'm dynoing:
1. Kathy -2004 G35 Coupe
2. Shannon -2003 350Z
3. Robert -2005 G35 Sedan
From our club -
I'm dynoing:
1. Demonteverde321
2. 98intrigue PAID
3. Chazm
4. FLFire PAID 9:00 PAID spot reserved
5. DJNiknala (GReddy TT)
6. Draco24433 (ATI Procharger) PAID
7. Neffster - tentative
8. Stpdevil - tentative
I'm not dynoing, I just want to watch:
1. G35Sean
2. C-Keith
3. chuckkrugiii
4. Gee pasta
5. Omi
6. SFLG35
From Ozoc -
I'm dynoing:
1. ZUL8TR - 350Z (nitrous)
2. SuperRoadster -350Z (HKS supercharger)
3. A2Z - 350Z (Greddy TT )
4. Phil
I'm not dynoing, I just want to watch:
1. CESAROTORRES - APS TT
2. Manny
3. JDMonster - 300zx
4. Sweetnlow-6mt 05
From Next Level Performance customers:
I'm dynoing:
1. Kathy -2004 G35 Coupe
2. Shannon -2003 350Z
3. Robert -2005 G35 Sedan
#116
Why won't you do it with an above ground dyno. It's not like you'll be tuning. It's just to run a number and do a comparison between cars and mods.
On another note:
I just pulled my set of RC 440's out of my car so anyone that wants them for $100 gets them. Only to a FGC member and must meet up at Neff's this weekend or at the dyno day. I don't know how much these go for but this has got to be a good price. They only have about 1500 miles on them. I am now using ~700cc injectors so no need for these. Hope these go to a deserving home and someone that is going to use them to their full potential. Maybe you want them Neff. It'll give you more headroom for your supercharger.
Alan
On another note:
I just pulled my set of RC 440's out of my car so anyone that wants them for $100 gets them. Only to a FGC member and must meet up at Neff's this weekend or at the dyno day. I don't know how much these go for but this has got to be a good price. They only have about 1500 miles on them. I am now using ~700cc injectors so no need for these. Hope these go to a deserving home and someone that is going to use them to their full potential. Maybe you want them Neff. It'll give you more headroom for your supercharger.
Alan
#117
#118
#120