Tell me how this sounds (Vortech)
Tell me how this sounds (Vortech)
- SS box
- 3.12 pulley
- Walbro 255 fuel pump
- 440cc injectors
I know upgrading to a UTEC would be better than SS box, but would this work ok?
- 3.12 pulley
- Walbro 255 fuel pump
- 440cc injectors
I know upgrading to a UTEC would be better than SS box, but would this work ok?
theres nothing wrong with that setup.
Why not stay with the fmu and aux pump from vortech? 3.12 pulley doesnt really require all those extra stuff if u arent going to upgrade to the 2.87 pulley later on.
If u are planning on staying with the 3.12 pulley this setup will be the cheapest and still reliable: ssbox, 380cc PE injectors (dont need clips like RC440cc), fmu, aux pump, smaller gates belt.
Why not stay with the fmu and aux pump from vortech? 3.12 pulley doesnt really require all those extra stuff if u arent going to upgrade to the 2.87 pulley later on.
If u are planning on staying with the 3.12 pulley this setup will be the cheapest and still reliable: ssbox, 380cc PE injectors (dont need clips like RC440cc), fmu, aux pump, smaller gates belt.
Mark350GT upgraded to 750cc injectors, so his old 440cc injectors are collecting dust. If you think the FMU & Aux pump are sufficient, then I just have to buy a new belt and the pulley...then get it all tuned.
Originally Posted by Moog
Mark350GT upgraded to 750cc injectors, so his old 440cc injectors are collecting dust. If you think the FMU & Aux pump are sufficient, then I just have to buy a new belt and the pulley...then get it all tuned.
Trending Topics
Originally Posted by Moog
If I stay w/ the FMU/aux pump, would I have to recalibrate the FMU for the 440cc injectors?
You dont have to bc u use the ss box to lean it out.
Also the 2.64 is the smallest that I'm aware of.
That is the setup I started out with then moved up to the AAM return fuel system and cams and headers and crawford plenum....plenty of room to grow for you with the setup you have mentioned.
...we dont need roads...
iTrader: (17)
Joined: Jan 2006
Posts: 2,816
Likes: 0
From: San Antonio, Texas

I would say stick with the FMU but lose the aux. pump. Just upgrade to the walbro. I have always heard you needed to get the fmu disc upgraded when going with bigger injectors, but could never find which disc is the right one.
Pump: ebay or intense motorsports when its on sell ($100). Just remember to get pump with the bag. I purchased mine on ebay and made an offer for 90 shipped and the seller agreed. Try ebay and u might get lucy 
3.12 pulley - Ebay: around 50-60 used and Superchargeronline: 80 shipped

3.12 pulley - Ebay: around 50-60 used and Superchargeronline: 80 shipped
Thread
Thread Starter
Forum
Replies
Last Post




