Stock injector info needed
#1
Stock injector info needed
OK - so yes I have searched my A$$ off for this info, and have seen a few threads mention that the stock injectors are 330cc. I've been all over the Internet, talked to the dealer, etc.
I need to somehow REALLY verify this and I also need to know what the lag times are for them.
I need to fine tune the car, and work out some bumps, etc...and I need to make sure the scaling is right for my new 550cc's before moving on.
Thanks in advance.
Rick
I need to somehow REALLY verify this and I also need to know what the lag times are for them.
I need to fine tune the car, and work out some bumps, etc...and I need to make sure the scaling is right for my new 550cc's before moving on.
Thanks in advance.
Rick
#2
Banned
iTrader: (3)
Join Date: Nov 2003
Location: Council Bluffs Ia.
Posts: 4,446
Likes: 0
Received 0 Likes
on
0 Posts
I had thought the injectors are 280's or 290's . Detchworks would be able to tell you for sure . They buy all the stock injectors they can buy to re-do into larger injectors . I sold them mine when they were doing R&D for it .
I also had Technosquare flash the ecu for my 550's , that way you dont have to do it with the Utec. or what ever you are using.
I also had Technosquare flash the ecu for my 550's , that way you dont have to do it with the Utec. or what ever you are using.
#4
Originally Posted by Audible Mayhem
they are 280s, i believe...
Now the big question - what should I use for a lag time entry for the scaling on my EMU? I have used '0' for the stock and .74 for the 550's...so far OK..seems fine, but better to be more on target I think.
Thanks all!!
Rick
#6
Originally Posted by Audible Mayhem
i usually use -12 percent for 550s, you can do the math yourself and figure it out
I'm not looking to figure out how to scale or adjust A/F with percentages - just if there is any knowledge of injector lag time for the stock units.
Rick
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
vstypicals
Buying, Selling & Leasing Discussion
6
07-20-2015 10:55 PM