Forced Induction Discussion of turbos , superchargers , and nitrous upgrades on the G35

Well My FI Days Have Come To An End.....

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 7, 2008 | 11:13 AM
  #46  
g35man04's Avatar
Thread Starter
|
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by Hi-Tech_G
Sounds like your rod went through the oil pan. I have had this happen with a 97 GS-R. I was running a Turbonetics Kit and the same thing happened....driving home from hanging out with some friends....loud clank followed by a pop and an oil trail about a 1000 feet long....and clouds of smoke. Sorry to hear man. This just makes me change my mind more and more about boosting the G.
CLEAR YOUR INBOX...I cant reply back to your PM..I dont have a link yet for sale...I am still working on getting the motor pulled apart.
 
Reply
Old Apr 7, 2008 | 11:14 AM
  #47  
g35man04's Avatar
Thread Starter
|
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by Moog
whats the difference in stage 1, stage 2, and stage 3...are those built blocks?
 
Reply
Old Apr 7, 2008 | 11:17 AM
  #48  
waijai's Avatar
i.love.gold
iTrader: (51)
Joined: Jan 2003
Posts: 10,598
Likes: 18
From: Dallas, TX
better rods, piston, sleeves
 
Reply
Old Apr 7, 2008 | 11:18 AM
  #49  
FI'ed G's Avatar
Registered User
Joined: Oct 2005
Posts: 2,381
Likes: 0
From: NY
Originally Posted by g35man04
explain more what you mean by Fuel Setup..Oil level I am assuming it was full..I had just picked it up from the dealer after having the oil changed 5 days ago...I have a JWT Oil Pan spacer and told them that I needed an extra QT of oil...that was over the phone...did my service advisor tell the mechanic...I dont know....So if I only had 5 QTR's I would be starved for oil which would result in blowing the engine...
The reason I ask why stop at 5500rpm is that there is got to be a reason why. Did GTM found that your injector is maxed out past 5500 rpm? If that is the case and you still shift past that point then you are probably leaning as hell. Do you have any A/F gauge? You should'v ask your tuner why coz you don't want to go above the area were you are tuned. Oil leve is one thing and A/F is another
 
Reply
Old Apr 7, 2008 | 12:15 PM
  #50  
g35man04's Avatar
Thread Starter
|
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
A/F Was running just fine..I have RC enterprise 550cc injectors. I was told that my fuel was being maxed out at that RPM range.....everything was good on A/F....10.2-10.6 or 7 is what it was normally at.
 
Reply
Old Apr 7, 2008 | 12:17 PM
  #51  
g35man04's Avatar
Thread Starter
|
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by Moog
better rods, piston, sleeves
yeah very interesting.
 
Reply
Old Apr 7, 2008 | 12:49 PM
  #52  
FastDontLie's Avatar
...we dont need roads...
iTrader: (17)
Joined: Jan 2006
Posts: 2,816
Likes: 0
From: San Antonio, Texas
Premier Member

Very sorry to hear man!!! Really wanted to see your car. But I do agree, your tune does not seem conservative at all. I just goT retuned & hitting 9psi at 6500 rpm w/ 380hp 340trq. Do you have, any fuel return system????
 

Last edited by FastDontLie; Apr 7, 2008 at 01:09 PM.
Reply
Old Apr 7, 2008 | 01:14 PM
  #53  
BeerViper's Avatar
Registered User
iTrader: (5)
Joined: Oct 2003
Posts: 2,690
Likes: 16
From: Keller, TX (DFW)
Originally Posted by g35man04
A/F Was running just fine..I have RC enterprise 550cc injectors. I was told that my fuel was being maxed out at that RPM range.....everything was good on A/F....10.2-10.6 or 7 is what it was normally at.
So you were told that the fuel was being maxed out at which RPM range? If your fuel is being maxed out at any usable RPM then you either need a higher pressure fuel pump or higher flowing injectors (and I see you already had 550cc RC injectors). I assume you had a walbro FP to go along with your upgraded injectors?

If the duty cycle on your injectors is above 85 - 90% then you could have been looking too lean at the top of the RPM range. I'm still running stock injectors but only pushing ~6psi and I think I am around 90 - 95% duty cycle at redline on the stock injectors. I'm just not going to mess with anything on mine because it's been solid the way it is...
 
Reply
Old Apr 7, 2008 | 01:17 PM
  #55  
Johnmikins's Avatar
Registered User
iTrader: (4)
Joined: Mar 2007
Posts: 2,775
Likes: 25
From: Long Beach Trick!
Damn, sorry to hear what happend dude....
 
Reply
Old Apr 7, 2008 | 01:22 PM
  #56  
g35man04's Avatar
Thread Starter
|
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by BeerViper
So you were told that the fuel was being maxed out at which RPM range? If your fuel is being maxed out at any usable RPM then you either need a higher pressure fuel pump or higher flowing injectors (and I see you already had 550cc RC injectors). I assume you had a walbro FP to go along with your upgraded injectors?

If the duty cycle on your injectors is above 85 - 90% then you could have been looking too lean at the top of the RPM range. I'm still running stock injectors but only pushing ~6psi and I think I am around 90 - 95% duty cycle at redline on the stock injectors. I'm just not going to mess with anything on mine because it's been solid the way it is...

I had the Walbro fuel pump as well....I dont know I am still waiting on some info from Cameron.
 
Reply
Old Apr 7, 2008 | 01:32 PM
  #57  
pabg35's Avatar
Simple Ax6 G
iTrader: (3)
Joined: Jul 2007
Posts: 368
Likes: 0
From: texas
Originally Posted by g35man04
whats the difference in stage 1, stage 2, and stage 3...are those built blocks?
sorry to hear about your car. stage 1 or 2 should be good for your setup, different pistons and rods. Another thing is maxing out your 550 cc injectors at 5300 rpm with your setup, maybe if you 440cc
 

Last edited by pabg35; Apr 7, 2008 at 01:34 PM.
Reply
Old Apr 7, 2008 | 01:34 PM
  #58  
g35man04's Avatar
Thread Starter
|
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
well to be honest with you I may just go with a stock block..im selling the procharger set up.
 
Reply
Old Apr 7, 2008 | 01:51 PM
  #59  
urban's Avatar
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Sorry to hear about your loss.

It sounds from what I have read so far that the car was only tuned up to a certain RPM, which is pretty low at 5200 and leaves so much room for issues to occur especially when our cars do their best work towards redline. If the car was not tuned to redline then who knows what AF your were at in that RPM band....just sounds like trouble to me.

I am also guessing this was on a stock block?

Lastly your numbers are pretty high for only 5200rpm, I can see many people wishing they had those numbers at redline.

Hope your future plans work out great
 
Reply
Old Apr 7, 2008 | 01:53 PM
  #60  
g35man04's Avatar
Thread Starter
|
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
yes it was the stock block..I am still waiting for a call back to find out some more info from my dyno number.
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 02:01 AM.