Performance Radiator or Oil cooler more important for FI
#1
#3
#4
#6
only mod needed for the Koyo is the filler spout needs to be moved from the driver side to the passanger side. unless you want to run a longer hose.
Both mods would help greatly but are not a must. but if you do it go with a radiator... you can always get a bigger oil pan and the extra quart you get will help cool
Both mods would help greatly but are not a must. but if you do it go with a radiator... you can always get a bigger oil pan and the extra quart you get will help cool
#7
Trending Topics
#8
Originally Posted by Deathmage
i have a phat asz stillen radiator for a peace of mind. Cali's getting pretty friggin hawt.. I would recommend the oil cooler first.
#9
#10
yah...I called and talked to sam about radiators. I'm leaning toward the PWR. I'm 6mt so I'll just spend that money on an oil cooler.
Where did you get the B&M oil cooler kit? Or did you piece it together? What size core did you get for the engine oil cooler?
Where did you get the B&M oil cooler kit? Or did you piece it together? What size core did you get for the engine oil cooler?
Last edited by EvolutionGSR; 05-20-2008 at 06:28 AM.
#12
#13
Originally Posted by EvolutionGSR
Stillen was one of the ones I was looking at, because they have a drop in for the G35C. Were you able to get coolant temp readings from before and after the install?
Originally Posted by escobar929
unless you plan on running high boost (14psi+) you dont need either, just get an oil pan spacer and throw an extra quart of oil and you're good
#14
+1 you can never have too much cooling, so why not have it? I mean unless personally you're on a budget, but if you have the money for it etc. Get it!! I spent more money on safety then anything else The amount of money I put in people would say why wont you have this much power, i built it for life reliable or at least surviving longer then others , for my peace of mind also.
#15
Originally Posted by Deathmage
that's crazy talk. oil pan spacer is the last thing you need. cooling is way higher priority than having extra oil. people should change oil often anyways. I only put 5 qt of oil on my larger capacity APS oil pan.
An extra qrt of oil will help engine longevity and will help cool. An oil pan allows this. An oil cooler will help this more, and will usually add 1-1.5 qrts. of oil.