Silencer_0's Vortech build
#153
#154
Update:
Been making a few changes to my setup.
- Koyo radiator and Mishimoto fan shroud are now installed. With the trans fluid running directly though my tranny cooler instead of running through the stock hot radiator, I'm seeing a constant 5-10 degree drop on my tranny temp gauge.
- Routed the vortech filter to the bottom of the fender behind my tranny cooler using a 4"-3.5" 90* reducer coupler, 45* 4" pipe, and a 4" K&N filter.
- 5/8" K&N breather filter for the crankcase.
- 4" wider, 2" taller FMIC. I'll be attempting to install it this weekend.
- 2.87 pulley and shorter belt to be installed after the FMIC.
- UpRev upgraded MAF to be installed at Church's prior to retuning.
Hoping to schedule the retune by next Saturday. I'll update with pics soon.
Edit: Pics!
Last edited by Silencer_0; 03-29-2012 at 02:33 AM.
The following 3 users liked this post by Silencer_0:
#155
The following users liked this post:
Silencer_0 (03-29-2012)
The following users liked this post:
Silencer_0 (03-29-2012)
#158
The following users liked this post:
B L U E S L A T E (03-29-2012)
#159
The following users liked this post:
Silencer_0 (03-30-2012)
#161
The following 3 users liked this post by Silencer_0:
#162
The following users liked this post:
Silencer_0 (04-01-2012)
#164
ill Sedan
iTrader: (87)
The following users liked this post:
Silencer_0 (04-01-2012)
#165
The following users liked this post:
Silencer_0 (04-01-2012)