Silencer_0's Vortech build
#93
#101
Thanks guys! smiLee, a couple things would be, there's 3 small bolts on the front of the engine that they don't tell you to remove to attach the bracket, that's in addition to the other 3 bolts that they do tell you to remove. You'll figure it out once you try to mount it.
Make sure the pipes are rotated the right way. You have to trim the breather hose going to the filter or else it'll kink. I ended trimming like 6".
Having it done by HB will be no problem. I'll either finish the install today or tomorrow and have it tuned on tuesday.
Make sure the pipes are rotated the right way. You have to trim the breather hose going to the filter or else it'll kink. I ended trimming like 6".
Having it done by HB will be no problem. I'll either finish the install today or tomorrow and have it tuned on tuesday.
Last edited by Silencer_0; 07-03-2011 at 02:07 AM.
The following users liked this post:
smiLee. (07-03-2011)