Going back to stock after Vortech
#1
Join Date: Oct 2010
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Going back to stock after Vortech
Alright think the G needs to go back to stock to trade in to the dealer. I bought the car with the Vortech system already installed so just want to make sure I am not missing anything.
Here's what I plan to do, let me know if I am missing anything:
-I have uprev installed so im going to get flashed back to stock...can I sell the license after?
- I have stock injectors
-I assume their is a return oil line I will need to plug?
-I need an intake, what's the cheapest option? I have an 05 rev up
That's all i can think of for now...am I missing anythig?
Thanks
Here's what I plan to do, let me know if I am missing anything:
-I have uprev installed so im going to get flashed back to stock...can I sell the license after?
- I have stock injectors
-I assume their is a return oil line I will need to plug?
-I need an intake, what's the cheapest option? I have an 05 rev up
That's all i can think of for now...am I missing anythig?
Thanks
#2
Wings Nation
iTrader: (59)
- i believe you can sell the license, but don't quote me on that.
- yes, if you have a V2 kit you'll need an AN plug for the oil pan (or wherever the feed is tapped).
- OEM or whatever is the cheapest [used] aftermarket short-ram intake you can find.
Are you using the vortech inline fuel pump or an aftermarket fuel pump? i only ask since most of the folks with an uprev tune usually opt to swap out the stock fuel pump for one that will allow you to push for more power.
- yes, if you have a V2 kit you'll need an AN plug for the oil pan (or wherever the feed is tapped).
- OEM or whatever is the cheapest [used] aftermarket short-ram intake you can find.
Are you using the vortech inline fuel pump or an aftermarket fuel pump? i only ask since most of the folks with an uprev tune usually opt to swap out the stock fuel pump for one that will allow you to push for more power.
#3
Join Date: Oct 2010
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Bean_VQ35DE
Engine, Drivetrain & Forced-Induction
49
08-03-2015 05:17 PM