Forced Induction Discussion of turbos , superchargers , and nitrous upgrades on the G35

Going back to stock after Vortech

Old May 3, 2012 | 06:45 PM
  #1  
SuperG118's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Oct 2010
Posts: 63
Likes: 0
Going back to stock after Vortech

Alright think the G needs to go back to stock to trade in to the dealer. I bought the car with the Vortech system already installed so just want to make sure I am not missing anything.

Here's what I plan to do, let me know if I am missing anything:

-I have uprev installed so im going to get flashed back to stock...can I sell the license after?
- I have stock injectors
-I assume their is a return oil line I will need to plug?
-I need an intake, what's the cheapest option? I have an 05 rev up

That's all i can think of for now...am I missing anythig?

Thanks
 
Reply
Old May 3, 2012 | 06:51 PM
  #2  
bigc's Avatar
Wings Nation
iTrader: (59)
Joined: Feb 2007
Posts: 7,931
Likes: 626
From: SoCal
Premier Member

- i believe you can sell the license, but don't quote me on that.
- yes, if you have a V2 kit you'll need an AN plug for the oil pan (or wherever the feed is tapped).
- OEM or whatever is the cheapest [used] aftermarket short-ram intake you can find.

Are you using the vortech inline fuel pump or an aftermarket fuel pump? i only ask since most of the folks with an uprev tune usually opt to swap out the stock fuel pump for one that will allow you to push for more power.
 
Reply
Old May 3, 2012 | 07:00 PM
  #3  
SuperG118's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Oct 2010
Posts: 63
Likes: 0
Yea I have the walboro 255lph in tank pump...that should be fine to keep in right? I have the stock one but I figured that wouldn't have any affect on anything...is that correct?
 
Reply
Old May 3, 2012 | 07:54 PM
  #4  
bigc's Avatar
Wings Nation
iTrader: (59)
Joined: Feb 2007
Posts: 7,931
Likes: 626
From: SoCal
Premier Member

i'd swap it back to OEM.
 
Reply
Old May 3, 2012 | 09:20 PM
  #5  
SuperG118's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Oct 2010
Posts: 63
Likes: 0
I had to modify the pump housing hopefully it will go back in fine
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EnCr1pt3d
Audio, Video & Electronics
5
Jul 8, 2019 02:48 PM
Tukeeg35
Engine - Intake/Fuel
7
Aug 21, 2015 04:19 PM
Bean_VQ35DE
Engine, Drivetrain & Forced-Induction
49
Aug 3, 2015 05:17 PM
Frostbite91
Audio, Video & Electronics
3
Aug 2, 2015 04:59 PM
apintojr
G35 Sedan V35 2003-06
0
Jul 23, 2015 10:52 AM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 04:59 PM.