I had my zex hooked up to the tps on the Tbody and can not get it to set,,, Is there a TPS on the peddle side of the car that will work i can get no help it like on one has put nitrous on a g35 or a Z no one seems to know how to program the zex system not even zex

 

socalted has got a zex set up. hes helping me with mine. hes very knowledgable. im not sure if he is using the throttle position sensor that came with the zex set up. i think hes using a seperate window switch. he could tell you about it.

 

your using a window switch and a micro switch

 

im using this: http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

 

Brands - I'm using the white wire from the ZEX nitrous management module directly to the factory TPS ( it stays between 4.5 - 5 VDC ). Then I've run the output to my NX Maximizer ( which is an alternative to a window switch like Ted has ). The rest of the ZEX portion of the install went just as their manual says ( programing of the module to WOT & idle, etc ). Not sure if this helps but I'll double check my wiring anyway. Good luck!

 

DID you program the car in park because i see on voltage in park later ill try N OR D also you used the green tps off the Tbody right.