What did you do to the G today?
No that seems tacky to me. Just the head liner. I need some real cf and what ever they use to coat it so it looks legit. Im still stumped on how to do the sun roof part that doesent come out.
Registered User
iTrader: (5)
4 yards should be more than enough. Let me know how the pillars go.
Anything to worry about when removing side pillars with airbags?
Finished the rear bench and started on the back portion. Looks great!!
Anything to worry about when removing side pillars with airbags?
Finished the rear bench and started on the back portion. Looks great!!
Here are some recent mods
Relocated power steering reservoir from driver side of hood latch closer to passenger side using a horizontal tank VS vertical.
Fabricated a filler plate to help hide the extra Engine Cooling fan harness/ Intercooler fans/Methanol Pump and N20 Injection Solenoid wires.
Custom Machined Jackshaft Bearing Assembly, Larger housing to help conceal socket head mounting fasteners, shaft redesigned to allow tighter bearing fit without wave washers, drive pulley shaft lengthened to allow 928 motorsports pulley hub full engagement and slip on without heating.
Removed mounting bracket for OEM Fuel Damper and Fuel Rail Support, rerouted vacuum lines.
Upholstered rear seat overlays.
Magnaflow X muffler installed on XO2 Exhaust.
Installed Summit Racing 10 Micron In Line Fuel Filter/Fabricated and Polished Mounting Bracket
Relocated power steering reservoir from driver side of hood latch closer to passenger side using a horizontal tank VS vertical.
Fabricated a filler plate to help hide the extra Engine Cooling fan harness/ Intercooler fans/Methanol Pump and N20 Injection Solenoid wires.
Custom Machined Jackshaft Bearing Assembly, Larger housing to help conceal socket head mounting fasteners, shaft redesigned to allow tighter bearing fit without wave washers, drive pulley shaft lengthened to allow 928 motorsports pulley hub full engagement and slip on without heating.
Removed mounting bracket for OEM Fuel Damper and Fuel Rail Support, rerouted vacuum lines.
Upholstered rear seat overlays.
Magnaflow X muffler installed on XO2 Exhaust.
Installed Summit Racing 10 Micron In Line Fuel Filter/Fabricated and Polished Mounting Bracket
Last edited by HotRodG35; Jul 8, 2013 at 02:03 PM.
I agree..
Here are some recent mods
Relocated power steering reservoir from driver side of hood latch closer to passenger side using a horizontal tank VS vertical.
Fabricated a filler plate to help hide the extra Engine Cooling fan harness/ Intercooler fans/Methanol Pump and N20 Injection Solenoid wires.
Custom Machined Jackshaft Bearing Assembly, Larger housing to help conceal socket head mounting fasteners, shaft redesigned to allow tighter bearing fit without wave washers, drive pulley shaft lengthened to allow 928 motorsports pulley hub full engagement and slip on without heating.
Removed mounting bracket for OEM Fuel Damper and Fuel Rail Support, rerouted vacuum lines.
Upholstered rear seat overlays.
Magnaflow X muffler installed on XO2 Exhaust.
Installed Summit Racing 10 Micron In Line Fuel Filter/Fabricated and Polished Mounting Bracket
Relocated power steering reservoir from driver side of hood latch closer to passenger side using a horizontal tank VS vertical.
Fabricated a filler plate to help hide the extra Engine Cooling fan harness/ Intercooler fans/Methanol Pump and N20 Injection Solenoid wires.
Custom Machined Jackshaft Bearing Assembly, Larger housing to help conceal socket head mounting fasteners, shaft redesigned to allow tighter bearing fit without wave washers, drive pulley shaft lengthened to allow 928 motorsports pulley hub full engagement and slip on without heating.
Removed mounting bracket for OEM Fuel Damper and Fuel Rail Support, rerouted vacuum lines.
Upholstered rear seat overlays.
Magnaflow X muffler installed on XO2 Exhaust.
Installed Summit Racing 10 Micron In Line Fuel Filter/Fabricated and Polished Mounting Bracket
gonna wait a bit before posting adding a Z/G upgrade on my sedan, lol
good job though
