What did you do to the G today?
#1309
#1312
Ported NWP Throttle Body, Kinetix Velocity, lower runners and new 3.5" FuRookie intake installed, Osiris tuned. Car feels good. Don't ask for numbers, didn't get a before, haven't dyno'd for an after, feels great and I don't care about dyno numbers on the engine as it currently sits, that'll come a bit later.
The following users liked this post:
jookyshank (11-02-2013)
#1314
It is twisted. It's the NWP oversized throttle body, so from the Kinetix is a black thermal spacer, then the NWP silver adapter plate (which bolts in to the manifold through the normal holes, then has an offset group of 4 bolts so the TB can bolt in without hitting the manifold) rotating it slightly for clearance, and then the TB itself.
The following users liked this post:
jookyshank (11-02-2013)
#1316
Akebono BBK parts
Got the Fueled Racing brackets for the Akebono BBK swap the other day and these are !
http://www.fueledracing.com
]
http://www.fueledracing.com
]
Last edited by GreySky; 11-05-2013 at 12:26 PM.
#1317
#1318
Consider replacing the plastic undertray with a metal one from Toolbooth *****, ZSpeed Performance, or Rare JDM (among others, I'm sure - ToolboothWilly happens to be a member/sponsor though). They have panels that drop down for access to the oil plug, it's only 2 bolts. Well worth it!
#1320
Ported NWP Throttle Body, Kinetix Velocity, lower runners and new 3.5" FuRookie intake installed, Osiris tuned. Car feels good. Don't ask for numbers, didn't get a before, haven't dyno'd for an after, feels great and I don't care about dyno numbers on the engine as it currently sits, that'll come a bit later.
TB outlet with NWP adapter is restricted down to 70mm, SSV intake opening is 72.5mm
See my post #1048.
The TB coolant pipes are easily removed by using vise grips and twist out pipes, tap holes and plug with 1/8" NPT plugs for aesthetics.
Last edited by HotRodG35; 11-04-2013 at 06:05 AM.