I was reading the post on freshalloy and it look like a very nice adjustment to make.

my question is ...has any1 encountered any problems doing this?

cruise working ok?

 

I did it. One thing, I did lower it too much (6-7) turns and the engagement point was immediatly after i started lifting it which was fun, but I had a very hard time getting it in 1st gear, which led me to believe it wasn't disengaging the clutch enough to swap gears. I put it back about 3 turns and now it's perfect, even adjusted the cruise control saftey switch.

04' G35 / 6MT / Tein Basic Coilovers
Volk 19" GT-7 Gunmetal

 

i tried it, man how the hell do you loosen that lock bolt???

there is no space to work on it there... i had a hard time turning the bolt because of the metal plate that was blocking it on the right side.

 

I did it, it was a pain in the *** to work in such little space. What you want to do is just grip the bolt and break it loose with a cresecent wrench. Its not on very tightly so you should not have a hardtime taking it out. I don't know how many turns I did but it did help the overall driving experience.

04 G35C 6mt/aero kit/nav/premium

 

yea its just didnt give me much space to move the wrench to break it loose..... I hope the cruis adjustment is alot easier

 

The cruise adjustment was easier than the clutch. I did remove the dead pedal and the fuse box cover to get some more space to turn the wrench.

It is *so* much easier to drive the car now, this is a great mod.

Now if the gearbox would just cooperate and not be so damn notchy all the time.


2003 G35 Coupe 6MT Black/black
Bay Area, CA
------------------
Grounding wires - Z intake tube - clear corners

 

thats a great tip ..maybe removing the dead pedal would help in turning that lock nut off

 

I just did this and it made a big difference for such a smnall adjustment I did.. added about 1 3/4 more tread on teh fork side, didnt even have to adjust the cruise control

 

I did it to my car and it's the feel that it should've had from the factory.

Jason Siu
http://www.g35coupe.net
http://www.g35coupe.net/e107_plugins...menu/index.php
Interactive gallery now fully functional!

 

how far did you adjust it? for how long have u adjusted it?

 

What is the "cruise control adjustment"? Also, are you adjusting your cluthces to engage at a higher or lower pedal height??

G35 6MT/DG/Fully Loaded
[i]HyperGround Kit
350Z intake duct
K&N drop-in
Aluminum pedals
50%-35% smoke tint

 

adjusting it lower...check out this tread..

http://forums.freshalloy.com/ubbthre...c=1&PHPSESSID=

 

I have no problem loosening the fork, just get a set of husky wrench...you dont have to take out the pin either.

 

yea I figured that You didnt have to...

so how much did everybody adjust thier by? and since how long had they have it adjusted