After helping a friend Install his factory Impul rear spoiler this weekend I have some concerns...
You may want to check with your sources that are molding the Fiberglass replica. If they're taking the mold directly from the Impul (which I think they would) then the radius of the spoiler WILL NOT match the radius or back edge of the trunk lid. When I helped "CHOPS" install his Factory Impul lip spoiler this past Saturday, we first found the exact center of the spoiler and lined it up with the back edge of the trunk lid. We discovered that we had to pull the ends (Left & Right Side) back between ONE & ONE and A HALF INCHES to line up with the outer edge of the trunk lid! Hopefully they will dry fit the replica before they release them for the group buy. I don't think Fiberglass will flex that much. This is a concern to me, because I am also Interested in the Group Buy...
Here is a link ro the original post & Pics...
http://www.g35frenzy.com/forum/showt...=1369#post1369
<P ID="edit"><FONT class="small"><EM>Edited by RugRatCoupe on 01/26/04 08:23 AM.</EM></FONT></P>

 

RugRat, I've been looking at some of the photos of other installs of the impul spoiler. The two installs I've looked at have the spoiler 1 to 2" away from the edge of the trunk, and the two side pieces are above the tail-light lenses (not covering them). Look at the photo below (if I can get it to import).

If you install the spoiler that way, you probably wouldn't need to bend it.

IMHO, the way you installed it will look better! But you could only do it with a urethane version, because of the bending.

I'm painting an M3 lip spoiler right now, and ran into the same issue. I've decided to do like you, and put it right at the edge of the trunk. I'll need to bend it about 3/8" at the ends to do this.

 

If the middle piece (the long one) is made a little longer then it should work fine. The way we installed it was the only way that we could keep the gap between the two spoilers uniform with the trunk to 1/4 panel gap.

I guess it up to individual taste as to where you want the spoiler placed.

Here is mine!



177215-impul low res.jpg

 

If the middle piece (the long one) is made a little longer then it should work fine. The way we installed it was the only way that we could keep the gap between the two spoilers uniform with the trunk to 1/4 panel gap.

I guess it up to individual taste as to where you want the spoiler placed.

Here is mine!



177215-impul low res.jpg

 

RugRat, have you been in contact with other owners that have installed the impul spoiler? Did they run into the same problem? The mold will be directly from the Impul kit. No variations that I am aware of. Is it possible to embed the pictures in this thread? I am not a member of that website you linked to, so I can't view the images to see if there is a difference between that install and what others have done.

---------------------------------
http://www.anythingbox.net

 

Here is a couple more shots.
I would like to see some other installs. I could have had a short mid piece, who knows?
I do like the way it turned out.
btw, I am not knocking a group buy, I think that it would be great to be able to get this spoiler for less than the rather steep price that impul is asking.
Anyway, I hope this helps.

Chops



177230-GAP2.jpg

 

Here is a couple more shots.
I would like to see some other installs. I could have had a short mid piece, who knows?
I do like the way it turned out.
btw, I am not knocking a group buy, I think that it would be great to be able to get this spoiler for less than the rather steep price that impul is asking.
Anyway, I hope this helps.

Chops



177230-GAP2.jpg

 

Another!



177231-GAP3.jpg

 

Another!



177231-GAP3.jpg

 

I already let the vendor know. He's actually wanting to get into contact w/ you RugRat. I PM'd you the info on G35frenzy already. If it just needs to be lengthened, I don't see a problem at all.

Ivory Pearl coupe

 

Trying again to attach the photo of another install



177240-140294-DSC00636%20copy.jpg

 

I've seen the actual Impul spoiler too installed and those buying the fiberglass version should beware. The price may be good but you may be disappointed after spending another $100 or more for paint. Like rugrat said, the spoiler does not follow the arc of the trunk and needs to be flexed a bit to fit just right. Lengthening is not an option either b/c that limits the arc of the spoiler and it will be more curved than the trunk.Just be careful, I have a feeling that there will be alot of disappinted people.

 

i know this is a little off and i dont remember it posted anywhere else but whats the pricing gonna be like and where can this be purchased from after it is produced? thanks

John H.
2003 Infiniti G35 Coupe 5AT-Ivory Pearl-Premium Pkg-Performance Pkg.

 

one option could be offered is that the wing is made in POLY Fiber (PFRP) it is a new material that has been used by many companies such as c-west and Ings+1. it is made the same way a fiberglass piece would be made but has flexibility similar to urethane. this new material will become the standard for fiberglass in the near future.

 

Nismoboy,
PM Moog, he's on this post. I believe he can point you in the right direction...