G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

Is the dealer blowing smoke up my buttocks?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 23, 2008 | 06:58 PM
  #1  
Laid GP's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Jul 2008
Posts: 95
Likes: 0
From: Oxford, MS
Is the dealer blowing smoke up my buttocks?

Before I bought my car I noticed a few minor problems with it. The dealer agreed to fix them for free and not put them against my warranty (warranty terms on used cars for this dealer are that if you don't have a claim, you get your money back at the end of the period)

The dealer is not a Nissan/Infiniti dealer, but they have sent the car to the local Nissan place.

One of the problems is that the auto-up on the driver's window is acting weird. The window does not do the automatic 1" or so roll down when you open the door. When you do the auto-up, the window rolls completely up, and then rolls back down about 3-4 inches.

They claim that they spoke with an Infiniti dealership in Memphis (nearest Infiniti dealer) who told them this was a "feature" on the G35s and the auto up was intended to behave in this manner.

I don't buy this - I even saw posts on here stating this was a symptom of a dying window motor.

Can some other 03 coupe owners confirm on here that their auto up does not function in that manner, and that it does do the 1" roll down when the door opens?

The other issues are nonworking power locks and what I think is a bad bearing on the back right wheel, which so far they seem to have no problems with.

I just have a nagging feeling that they are going to give it back to me with the window still messed up and claim this is a "feature". The kicker is that this dealership installed a power window motor in that very window when they got the car in, so I imagine that is why they don't want to replace it already!
 
Reply
Old Jul 23, 2008 | 07:44 PM
  #2  
htownboy's Avatar
Registered User
Joined: Jan 2005
Posts: 982
Likes: 0
If the window motor was indeed replaced, it sounds like it was not properly calibrated as it must be... There is more info on this and I am sure if you search you will find or someone will add it here soon as many have gone through this.
I haven't had the issue (yet) so I'm not real familiar with it but do know somewhat from reading posts here.
 
Reply
Old Jul 23, 2008 | 07:52 PM
  #3  
Locksmith's Avatar
Former G35driver Vendor
iTrader: (83)
Joined: Sep 2005
Posts: 6,991
Likes: 50
From: Minnesota
The dealer is full of crap. Your window should roll up all the way 1 touch auto, and if you open the door it will roll down about an inch automatically.
 
Reply
Old Jul 23, 2008 | 07:59 PM
  #4  
MikeYo's Avatar
Registered User
iTrader: (37)
Joined: Dec 2007
Posts: 3,577
Likes: 12
From: South Florida
Complete BS. I had this issue with one of our coupes and it was a wire was too taught when the door was open. After I pulled the wires to give them more slack, it works like it should.
 
Reply
Old Jul 23, 2008 | 08:41 PM
  #5  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
Stealership Smoke....?

Yep, you should be aware when smoke is encircling your backside they're giving you a line of B.S.!
Gary
 
Reply
Old Jul 23, 2008 | 09:32 PM
  #6  
NoirKyouto's Avatar
Registered User
Joined: Jun 2007
Posts: 118
Likes: 0
yup, definitely something off. Mine only does it about 1cm if that... all it needs to do is not hit the rubber seal on closing...
 
Reply
Old Jul 23, 2008 | 09:35 PM
  #7  
codeflux's Avatar
Registered User
iTrader: (26)
Joined: May 2004
Posts: 4,105
Likes: 4
From: San Francisco, CA
bullsh1t. then need to recalibrate the pinch sensor.
 
Reply
Old Jul 23, 2008 | 09:49 PM
  #8  
Mr.GEE's Avatar
Registered User
20 Year Member
Joined: Feb 2005
Posts: 470
Likes: 42
From: Severn, Maryland
Show them the owner's manual where it describes the window operation. If you don't have a manual, Google "Infiniti owner's manual" and you can download and print one from the Nissan site for free.
 
Reply
Old Jul 23, 2008 | 11:49 PM
  #9  
silvsurf's Avatar
Registered User
iTrader: (10)
Joined: Mar 2003
Posts: 595
Likes: 0
From: Long Island
Total bull****. I have an 03 and had this problem shortly after purchasing the car. Window motor was faulty and replaced under warranty. This was a fairly common problem so I'm sure your dealership is familiar with it.
 
Reply
Old Jul 24, 2008 | 12:22 AM
  #10  
Laid GP's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Jul 2008
Posts: 95
Likes: 0
From: Oxford, MS
Thanks guys - if they try to argue with me I will show them the manual, and if necessary, this thread.
 
Reply
Old Jul 24, 2008 | 10:29 AM
  #11  
V35 Skyline GT's Avatar
Registered User
iTrader: (10)
Joined: Jul 2006
Posts: 3,942
Likes: 7
From: PNW in Washington
6MT Coupe
Yup...first they did a reset/recal on mine (work for only a couple days) Then later replaced motor, which window only goes down very little when opening door, about 1/8-1/4" not an inch. Then soon afterward, replaced regulator b/c only one side of window would go down while the other stayed up when opening door.

This was on an 06. Original motors are known not to last long. New ones I was told by my dealer, are revised verions and better/stronger/last longer/etc.
 
Reply
Old Jul 24, 2008 | 12:23 PM
  #12  
silver g's Avatar
Registered User
iTrader: (10)
Joined: Jun 2006
Posts: 2,374
Likes: 14
From: Ladera Ranch / San Clemente
Window motor is bad. Tell them to replace it.
 
Reply
Old Jul 24, 2008 | 12:52 PM
  #13  
mIKE's Avatar
Registered User
iTrader: (4)
Joined: Dec 2007
Posts: 6,408
Likes: 7
From: Orange County, CA
definately not a feature.
 
Reply
Old Jul 24, 2008 | 12:55 PM
  #14  
Hi-TechG35's Avatar
Registered User
iTrader: (9)
Joined: Jul 2006
Posts: 15,043
Likes: 22
From: Pothole Central and still ridin slammed...Boston
+1000 with everyone on the board!
 
Reply
Old Jul 24, 2008 | 12:57 PM
  #15  
BadBoy06's Avatar
Registered User
iTrader: (2)
Joined: Feb 2006
Posts: 3,442
Likes: 0
From: Long Island, N.Y.
yep..what they said^^^^^^^^^^^
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:31 PM.