G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

sunroof bolts loose, project i can fix myself?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old May 9, 2012 | 01:45 PM
  #1  
Bphillips330's Avatar
Thread Starter
|
Registered User
Joined: May 2011
Posts: 29
Likes: 0
From: Cincinnati, OH
sunroof bolts loose, project i can fix myself?

I have an 04 g35 coupe with sunroof. When I had it in the shop a while ago, i complained about a rattling, like a loose bolt up in sunroof area. The tech said that sometimes over time the mounting bolts can come loose. When i drive over bumps I get a ton of noise and rattles from the sunroof. I have used silicone around the rubber seal to try and SHUT IT UP. hahah

I have read this is common?

Here is my idea. Am I correct in attempting this?
I have found some stuff on how to remove the headliner in the car. Time consuming but does not look overly difficult. How is the sunroof mounted? Is it simply a bracket with some bolts squeezing the roof? If one of these bolts have loosed over time, will simply tightening the bolts down make the noise go down as the roof will not "shift around" as much? How tight should I make these bolts?

I am pretty handy, but is this to much work? Is it worth it to try and get the damm sunroof to be quiet down?
 
Reply
Old May 9, 2012 | 04:30 PM
  #2  
bigc's Avatar
Wings Nation
iTrader: (59)
Joined: Feb 2007
Posts: 7,931
Likes: 626
From: SoCal
Premier Member

This DIY will show you how to remove the headliner:
https://g35driver.com/forums/audio-v...r-removal.html

I had the same issue - one of the bolts holding up the sunroof track came loose causing the track to tap against the metal support on the underside of the roof. The sound went away when I re-installed the bolt. Its not hard, just a little time consuming. Go slow so you don't crease the headliner.

Once you find the loose bolt, just hand-tighten it (add some blue lock-tite if you're worried). Since everything is already out of the car, you might as well check the other bolts in the area too (rear parcel shelf, pillars, etc.).
 
Reply
Old May 9, 2012 | 05:15 PM
  #3  
Bphillips330's Avatar
Thread Starter
|
Registered User
Joined: May 2011
Posts: 29
Likes: 0
From: Cincinnati, OH
Thanks, how long do you think this will take?
 
Reply
Old May 10, 2012 | 12:33 AM
  #4  
bigc's Avatar
Wings Nation
iTrader: (59)
Joined: Feb 2007
Posts: 7,931
Likes: 626
From: SoCal
Premier Member

Give yourself an hour. No need to rush though.
 
Reply
Old May 10, 2012 | 02:29 AM
  #5  
junon's Avatar
Registered User
iTrader: (6)
Joined: Feb 2009
Posts: 277
Likes: 4
From: Fremont, CA
Trickiest part will be the oh-**** handle removal. But if it's not playing nice, there should be enough hang for you to reach the nuts as is
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
G35VSHNG37
G35 Coupe V35 2003 - 07
17
Oct 25, 2015 08:43 PM
Danielek
G35 Sedan V35 2003-06
2
Sep 20, 2015 12:08 PM
Danielek
G35 Sedan V35 2003-06
1
Aug 11, 2015 09:33 AM
atk08
General Media Share
0
Jul 30, 2015 03:12 PM
will091195
General Tech Questions
1
Jul 27, 2015 09:19 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:25 AM.