2003 G coupe PARANOIA !
#1
2003 G coupe PARANOIA !
What services or preventative maintenance do I need ?!?!
I have an 03 Coupe with 80k miles.
I flushed all fluids @ 60k , tranny, brakes, coolant, rear diff, steering.
I feel something needs replacing or repairing on my car. I change my oil at 4k miles and use
Kendall 5w-40 Full Synthetic with K&N Filter
I changed out my in cabin air filter to a charcoal
Im planning on replacing Valve covers and spark plugs at 90k
Just replaced both drive belts.
I have no mods except a Z-tube - SO IS THERE ANYTHING I NEED TO DO ?!
Heres a pic of my car
I have an 03 Coupe with 80k miles.
I flushed all fluids @ 60k , tranny, brakes, coolant, rear diff, steering.
I feel something needs replacing or repairing on my car. I change my oil at 4k miles and use
Kendall 5w-40 Full Synthetic with K&N Filter
I changed out my in cabin air filter to a charcoal
Im planning on replacing Valve covers and spark plugs at 90k
Just replaced both drive belts.
I have no mods except a Z-tube - SO IS THERE ANYTHING I NEED TO DO ?!
Heres a pic of my car
Last edited by jutn35; 07-20-2012 at 02:25 AM.
#2
#3
#4
#6
change Spark plugs - I I have 03 with 125 k, I change the spark plugs at 50k, I have done twice already- third set will be at 150k
#7
Trending Topics
#8
#9
#10
So why not look and see before actually undertaking the process? No sense in fixing something so simple if it ain't broke.
Spark plugs took me 45 minutes on the G. It's nice to only have to remove the intake tubing. You have to pull the whole upper intake manifold on the Maxima.
You also don't really need to run Iridiums. I bought a set of NGK-R's (platinums, AKA the plugs that most Nissans come with from the factory) for about $28.
You also don't really need to run Iridiums. I bought a set of NGK-R's (platinums, AKA the plugs that most Nissans come with from the factory) for about $28.
#11
#14
Registered User
iTrader: (10)
Thread
Thread Starter
Forum
Replies
Last Post
TWASkyliner
G35 Coupe V35 2003 - 07
26
02-08-2020 08:00 PM
Bean_VQ35DE
Engine, Drivetrain & Forced-Induction
49
08-03-2015 05:17 PM