I was trying to take out the double din to reinstall flip comparment above ac controls and as I was going through the proccess I got to were you undo the clips around clock and I ended up cracking it. Any ideas on a fix? Gonna try and super glue back together but any ideas to make it look clean again.. or good looking dash covers for the g?

 

[IMG]http://i48.tinypic.com/2vl7f2v/

 

FTFY:

 

You'll have to buy a new piece. If you glue it it will prob make it look worse...


If you wrapped it in vinyl, and did a good job, you could make it look like new. Vinyl wrap it in 3m carbon fiber.

 

Yeah, I would probably just buy a new piece... although it seems a bit more expensive than you would think: http://www.infinitipartsusa.com/Item...975-110173.htm $112??

 

in stock, Black or Willow - $80 shipped

 

Depending on the year, I dont see any mention by the OP of year, the 100$+ is for new coupe and above (07+)

 

With the amount of G coupes written of lately, I'm sure they should be in most junk yards for few dollars.

you mean 05+? or am I wrong

 

Also judging from the picture, its definitely an 03-04. 05+ had the clock in the middle of the HVAC display

 

If you wanted to get creative you could sand it down after you glue it and repaint it
Probably best to just get a new one though

 

Repainting JUST that trim piece would look like shiit. & Prolly cost him more

 

Thats why I said buy one haha

 

I have a black one I could sell you for $30 plus shipping. There's nothing at all wrong with it except you'll need to use the alarm LED from your old one. The board will come out of yours and go in to the one I have and you're good to go. I broke that LED light connector on mine when replacing the clock bulbs and to my surprise you can't just buy a new LED board. I had to replace the whole trim piece that you broke, so there's nothing wrong with what I have except for that LED board piece and you have a good piece to swap to it. PM me if you're interested.