Coupe Random Little Question Thread
#946
Depending on the angle, an ironing board could produce quite a bit of downforce. It just wouldnt look nice, and would have a lot of drag. But lets be real here, aerodynamics on street cars (adding wings, diffusers, etc) has minimal effect. In general it is just for looks.
Last edited by tha_ape; 05-09-2015 at 09:56 AM.
#949
#950
Premier Member
iTrader: (11)
If stuck meaning you can't press it down, then that's another problem that I don't have an answer for.
Scraping sounds can be a few things, most common are the brake dust shield rubbing on the rotor, or worn brake pads.
#953
DIY Muffler Delete Causes Loss/Gain In Power?
I recently bought a 2004 G35, and the guy I bought it from put an Infiniti Q50 exhaust on it and cut it off about 6 inches past the catalytic converter. I would like to know if this causes any gain or loss of power, if it doesn't I will just straight pipe it back and put some tips on. Any suggestions or tips for doing that would be nice also. Thanks! --Adam
#954
#958
couple questions for you nice gents:
the splash guards/mud guards (i think thats what they are called) are missing some of the bolts or plastic fasteners (are they metal or plastic) or whatever that hold the mud guard up and i was wondering if anyone knows what size they are and where to get some more for relatively cheap?
also, im having trouble finding a gray replacement interior piece mostly because i cant find what its technical name is, ive seen some websites call it a inner bottom door sill, ive seen it called a kick plate moulding, etc just a little confused. ive been trying to find one for a while and when i do happen across one its usually black. mine looks good but the peice that snaps it down in the back is broken so the plate just hangs there (the weatherstrip is loose because of this)
i included a picture for both questions to help clarify.
thanks!
the splash guards/mud guards (i think thats what they are called) are missing some of the bolts or plastic fasteners (are they metal or plastic) or whatever that hold the mud guard up and i was wondering if anyone knows what size they are and where to get some more for relatively cheap?
also, im having trouble finding a gray replacement interior piece mostly because i cant find what its technical name is, ive seen some websites call it a inner bottom door sill, ive seen it called a kick plate moulding, etc just a little confused. ive been trying to find one for a while and when i do happen across one its usually black. mine looks good but the peice that snaps it down in the back is broken so the plate just hangs there (the weatherstrip is loose because of this)
i included a picture for both questions to help clarify.
thanks!
#959
couple questions for you nice gents:
the splash guards/mud guards (i think thats what they are called) are missing some of the bolts or plastic fasteners (are they metal or plastic) or whatever that hold the mud guard up and i was wondering if anyone knows what size they are and where to get some more for relatively cheap?
also, im having trouble finding a gray replacement interior piece mostly because i cant find what its technical name is, ive seen some websites call it a inner bottom door sill, ive seen it called a kick plate moulding, etc just a little confused. ive been trying to find one for a while and when i do happen across one its usually black. mine looks good but the peice that snaps it down in the back is broken so the plate just hangs there (the weatherstrip is loose because of this)
i included a picture for both questions to help clarify.
thanks!
the splash guards/mud guards (i think thats what they are called) are missing some of the bolts or plastic fasteners (are they metal or plastic) or whatever that hold the mud guard up and i was wondering if anyone knows what size they are and where to get some more for relatively cheap?
also, im having trouble finding a gray replacement interior piece mostly because i cant find what its technical name is, ive seen some websites call it a inner bottom door sill, ive seen it called a kick plate moulding, etc just a little confused. ive been trying to find one for a while and when i do happen across one its usually black. mine looks good but the peice that snaps it down in the back is broken so the plate just hangs there (the weatherstrip is loose because of this)
i included a picture for both questions to help clarify.
thanks!