Coupe Random Little Question Thread
#1321
Well, I got the motive pressure tool. Bleed calipers TWICE as per FSM. Still spongy and the pedal felt no difference. I was about to drive straight to Nissan and be done with it. However, I came across a video about the scan tools that activate your ABS system and aid in bleeding. My last theory is that there is air in the ABS module. So, my understanding is that I have to activate it via scan tool (or on a dirt road as others have said). The tool I've come across is $150 and does work on our car.
Thoughts?
Thoughts?
#1322
My response was not to you but yeah, I'm pretty straightforward and I thinks it comes across as blunt at times in our digital communication world. Remember though what I post is only my opinion based on experience and if you like what you have done to your car enjoy it, don't let my shizz bring you down. ;D
#1323
Just talked to Nissan. $120 diagnostics + cost to fix. If it is air in the brakes it's an additional $120 to bleed. He also mentioned that his service manager has to approve them working on the car because I suspect he didn't know that the Brembo's are OEM parts. After telling him I've tried to bleed them a few times he thinks its the master cylinder or booster. I don't think its either. A failing booster has very different symptoms. And I doubt my master cylinder would fail conveniently at the same time I did this caliper switch. So I'm looking at a potential $240 brake bleed... The scan tool for our cars can be had for $150 on Amazon that does also have the abs functions. Very frustrating. I may just buy the tool.. Or at the very least tonight drive around like a maniac to try to get it to activate.
#1324
Just talked to Nissan. $120 diagnostics + cost to fix. If it is air in the brakes it's an additional $120 to bleed. He also mentioned that his service manager has to approve them working on the car because I suspect he didn't know that the Brembo's are OEM parts. After telling him I've tried to bleed them a few times he thinks its the master cylinder or booster. I don't think its either. A failing booster has very different symptoms. And I doubt my master cylinder would fail conveniently at the same time I did this caliper switch. So I'm looking at a potential $240 brake bleed... The scan tool for our cars can be had for $150 on Amazon that does also have the abs functions. Very frustrating. I may just buy the tool.. Or at the very least tonight drive around like a maniac to try to get it to activate.
#1326
Hang in there man, there actually fun cars when you get them mechanically sound and the satisfaction of getting it there...
#1327
Premier Member
iTrader: (11)
Well, I got the motive pressure tool. Bleed calipers TWICE as per FSM. Still spongy and the pedal felt no difference. I was about to drive straight to Nissan and be done with it. However, I came across a video about the scan tools that activate your ABS system and aid in bleeding. My last theory is that there is air in the ABS module. So, my understanding is that I have to activate it via scan tool (or on a dirt road as others have said). The tool I've come across is $150 and does work on our car.
Thoughts?
Thoughts?
#1328
Yes, I bleed inner valve first then outer. Yes, valves are oriented correctly. I've done pumping brakes as well. Believe me ive ruled out everything I can do. The other option I could think of was air in abs.
So I drove around to get it to active and did a bunch of times but the car died and coincidentally I now need an alternator. Which I'm doing over the weekend. I guess its better I discovered that while driving on my own road rather than going to work im the morning. But I wont be able to get to the brakes until that is done...
So I drove around to get it to active and did a bunch of times but the car died and coincidentally I now need an alternator. Which I'm doing over the weekend. I guess its better I discovered that while driving on my own road rather than going to work im the morning. But I wont be able to get to the brakes until that is done...
#1329
Suspension advice
I have a 2004 G35 coupe I've been working on and would like to get some input into a couple of options I've come up with. The car has Hotchkiss lowering springs with 2004 OEM struts and shocks so looking to update it. I like the lowered stance and the ride is fair, you can tell it had a sporty ride but has gotten a little worn out. It has SPC camber arms on the rear and nothing on the front. The alignment was a mess when I got it and put new tires on it. I've ordered SPC toe bolts and deliberating on which front camber arms (a future purchase). I'm considering either keeping the springs and doing new shocks or doing a base true coil over. I'm trying to decide between the KYB Excel-g struts and shocks on existing springs or the Tein Street Basis coil overs. My primary use of the car is just a daily driver. It will not see any track time other than maybe an occasional 1/8 mile run with friends on test and tune night. My concern with the KYB option is since they are a factory replacement style shock and not specifically for a lowered car how will it handle? Will it be bouncy with the extra compression. My concern with the Teins will they lower to the same stance as the current Hotchkiss setup? I kinda like the coil over option as I can eliminate the toe bolts and install toe links making a nice looking setup. Ideally I would love to the the Bilstein B8 for lowered setups but at close to $800 that's a little more than I want to spend. KYB is definately the cheapest option at $300 and the Tein's are just over $500.
#1330
I have a 2004 G35 coupe I've been working on and would like to get some input into a couple of options I've come up with. The car has Hotchkiss lowering springs with 2004 OEM struts and shocks so looking to update it. I like the lowered stance and the ride is fair, you can tell it had a sporty ride but has gotten a little worn out. It has SPC camber arms on the rear and nothing on the front. The alignment was a mess when I got it and put new tires on it. I've ordered SPC toe bolts and deliberating on which front camber arms (a future purchase). I'm considering either keeping the springs and doing new shocks or doing a base true coil over. I'm trying to decide between the KYB Excel-g struts and shocks on existing springs or the Tein Street Basis coil overs. My primary use of the car is just a daily driver. It will not see any track time other than maybe an occasional 1/8 mile run with friends on test and tune night. My concern with the KYB option is since they are a factory replacement style shock and not specifically for a lowered car how will it handle? Will it be bouncy with the extra compression. My concern with the Teins will they lower to the same stance as the current Hotchkiss setup? I kinda like the coil over option as I can eliminate the toe bolts and install toe links making a nice looking setup. Ideally I would love to the the Bilstein B8 for lowered setups but at close to $800 that's a little more than I want to spend. KYB is definately the cheapest option at $300 and the Tein's are just over $500.
The following users liked this post:
jparker7269 (02-01-2019)
#1331
I have a 2004 G35 coupe I've been working on and would like to get some input into a couple of options I've come up with. The car has Hotchkiss lowering springs with 2004 OEM struts and shocks so looking to update it. I like the lowered stance and the ride is fair, you can tell it had a sporty ride but has gotten a little worn out. It has SPC camber arms on the rear and nothing on the front. The alignment was a mess when I got it and put new tires on it. I've ordered SPC toe bolts and deliberating on which front camber arms (a future purchase). I'm considering either keeping the springs and doing new shocks or doing a base true coil over. I'm trying to decide between the KYB Excel-g struts and shocks on existing springs or the Tein Street Basis coil overs. My primary use of the car is just a daily driver. It will not see any track time other than maybe an occasional 1/8 mile run with friends on test and tune night. My concern with the KYB option is since they are a factory replacement style shock and not specifically for a lowered car how will it handle? Will it be bouncy with the extra compression. My concern with the Teins will they lower to the same stance as the current Hotchkiss setup? I kinda like the coil over option as I can eliminate the toe bolts and install toe links making a nice looking setup. Ideally I would love to the the Bilstein B8 for lowered setups but at close to $800 that's a little more than I want to spend. KYB is definately the cheapest option at $300 and the Tein's are just over $500.
#1332
On a daily driver you don't need coilovers. I am very happy with both the ride and handling of my G on KYB struts all around, and I push my car every time I get the chance.
If you track, the adjustment ability of coilovers is a huge advantage but if not, spend the money on replacing old parts and installing poly bushings all round instead. Even if the rubber bushings seem fine now they're the weak point in the front end and you'll have to pull everything apart to replace them sooner or later.
If you track, the adjustment ability of coilovers is a huge advantage but if not, spend the money on replacing old parts and installing poly bushings all round instead. Even if the rubber bushings seem fine now they're the weak point in the front end and you'll have to pull everything apart to replace them sooner or later.
#1334
On a daily driver you don't need coilovers. I am very happy with both the ride and handling of my G on KYB struts all around, and I push my car every time I get the chance.
If you track, the adjustment ability of coilovers is a huge advantage but if not, spend the money on replacing old parts and installing poly bushings all round instead. Even if the rubber bushings seem fine now they're the weak point in the front end and you'll have to pull everything apart to replace them sooner or later.
If you track, the adjustment ability of coilovers is a huge advantage but if not, spend the money on replacing old parts and installing poly bushings all round instead. Even if the rubber bushings seem fine now they're the weak point in the front end and you'll have to pull everything apart to replace them sooner or later.
#1335
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods