Coupe Random Little Question Thread
#1351
That makes a lot of sense. And what do you mean by bad form? I also bought some impul side skirts with it but I had to send them back Bc it was impossible to put both sides on it at once was like it was half an inch to short.
#1352
I bought my Kuruma bumper and Impul sideskirts from a local guy. I put it on myself and it was an almost perfect fit.
#1353
#1354
I'd say contact concept z. They're really cool guys and they've always helped me out. I'm not sure what their return or warranty process is after it's bee fitted and painted.
You can send proof of professional installation and maybe they'd do something?
You can send proof of professional installation and maybe they'd do something?
#1355
Edit: and I sent them those pics too
Last edited by Jasonpowell98; 03-17-2019 at 08:09 PM.
#1356
Those sideskirts are supposed to also get screwed into the door area. That will pull it up and in.
As for it being shorter.....I think youre right. Mine was very slightly short as well but I used a Dremel to shave off some of the plastic on the inside and was able to lay it down flat inside the wheel well area. But doesnt even look like its possible with yours. I gotta see it in person to know for sure though.
As for it being shorter.....I think youre right. Mine was very slightly short as well but I used a Dremel to shave off some of the plastic on the inside and was able to lay it down flat inside the wheel well area. But doesnt even look like its possible with yours. I gotta see it in person to know for sure though.
#1357
#1359
On the ground. After pulling the backseat, I discovered that the previous owner had put to long of screws in the fuel pump retaining ring and poke a hole through a couple holes.... Talked to a local shop and they said to try some tank repair puddy... So I am in the process of letting it dry.. I am also going to make a rubber gasket for mounting ring. If that fails on to a fuel cell...
#1360
On the ground. After pulling the backseat, I discovered that the previous owner had put to long of screws in the fuel pump retaining ring and poke a hole through a couple holes.... Talked to a local shop and they said to try some tank repair puddy... So I am in the process of letting it dry.. I am also going to make a rubber gasket for mounting ring. If that fails on to a fuel cell...
#1361
Join Date: Mar 2019
Location: Georgia
Posts: 21
Received 0 Likes
on
0 Posts
"Majestic Blue" with aftermarket headlights and a plenum spacer on Kansei Tandems.
#1362
Honestly, its probably just easier to fix the one u already have, rather than buying a new one.
#1363
#1364
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,299
Received 1,487 Likes
on
1,222 Posts
G35 sedan w/ too much money in mods
Venom are you talking about your side marker lights that are in the front end of each fender? If so grab the back side, side closest to the wheel well, and just pull them out. The bulb can be replaced easily or a brand new housing will just clip right in. To re-install put the front of the housing in first and just push the back end in. Easy peasy…..
#1365