Complete Exhaust System Change Out
#1
Complete Exhaust System Change Out
Just a heads up, but I am in the process of doing this right now on a 2009 370Z with my 2003 G35 6spd Coupe to follow.
From the cats back the system just about falls off the car in 15-20 minutes. The passenger side header was gone in about an hour with the cat attached. The driver side held me up with the very back nut taking quite a bit of time to get to and break loose. The steering shaft has to come apart for the header to come out on the Z - not sure if that is needed on the G yet. All of this is done with the car up on jack stands and a really good selection of tools.
I will be writing this up on my personal blog but I don't think it is right to post the link here so if anyone wishes to read it, hit me up and I will give you the link to it.
From the cats back the system just about falls off the car in 15-20 minutes. The passenger side header was gone in about an hour with the cat attached. The driver side held me up with the very back nut taking quite a bit of time to get to and break loose. The steering shaft has to come apart for the header to come out on the Z - not sure if that is needed on the G yet. All of this is done with the car up on jack stands and a really good selection of tools.
I will be writing this up on my personal blog but I don't think it is right to post the link here so if anyone wishes to read it, hit me up and I will give you the link to it.
#4
Registered User
iTrader: (10)
#5
http://my350z.com/forum/engine-drive...tallation.html
Or like this?
https://g35driver.com/forums/faq-diy...r-install.html
Or like this?
http://www.stillen.com/prodfiles/508350M~inst.pdf
Or like this?
http://www.borla.com/17221.pdf
Or like this?
https://g35driver.com/forums/intake-...on-review.html
Or like this?
http://my350z.com/forum/intake-exhau...-and-vids.html
Or like this?
http://www.the370z.com/diy-section-d...tallation.html
Or like this?
http://www.berktechnology.com/news/d...t-installation
Or like this?
I guess another could be helpful to people that dont have access to Google.com.
#6
#7
Trending Topics
#10
What is next up in that mad head of yours? Are you going to change out an intake?
#12
Took him 5 years to plan out how to pull the mod off. This isnt a simple bolt on mod that can be done in 3-4 hours in your driveway. This takes an engineering degree, years of study and meticulous notes to pull off correctly. If done wrong, you could blow the welds off your intake.