G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

What do we do when there are no more mods to do?

Old Oct 9, 2014 | 02:09 AM
  #16  
thegreatkwijibo's Avatar
Registered User
Joined: Aug 2012
Posts: 1,486
Likes: 142
From: Highland, Texas
Originally Posted by Gdirtyfive55
I don't want coilovers. I couldn't stand to go any lower because of scrapage. I already have enough of a hard time going over shib as it is, plus, I like it stiff. Haha

Just put on a rear sway today. I'm thinking about a front one, but the rear is the real weak point. But, yeah, I still got a few things just thinking about in a few months when I start running out if stuff.
haha didn't know you had messed with sways :P as far as coils go Mine aren't much lower than your springs and I'm pretty sure they're much stiffer. because as I'm sure you know all the ladies like a stiff ride
 
Reply
Old Oct 9, 2014 | 09:54 AM
  #17  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
Post pic of your ride!

Originally Posted by Gdirtyfive55
My car looks stock as **** except for the stance. But that's how I want it. But yeah, I'll probably get an 06 sport bumper or a nismo bumper, some sport sides, and still thinking about HFCs. But that's kind of it.. I have always been able to look forward to the next thing... Can't really imagine not being able to that no more. Haha
You haven't scratched the surface on mods Gdirtyfive! You posted you did a rear sway bar and you're "thinking" about the front? Get a front sway bar and adjustable endlinks so you'll go around corners flat. You don't want coilovers, how about Tokico D Spec shocks that are adjustable? Thinking about HFCs, that's a good way to pickup 8 whp but if you have a OE exhaust you won't like the rasp they create. It's like putting 1 lb of **** in an 8 oz. cup. You're not even close to running out of mods and you've been here long enough to see what works and what doesn't!
Gary
 
Reply
Old Oct 9, 2014 | 10:02 AM
  #18  
ScraggleRock's Avatar
Thread Starter
|
Registered User
iTrader: (4)
Joined: Dec 2013
Posts: 6,811
Likes: 738
Originally Posted by gary c
You haven't scratched the surface on mods Gdirtyfive! You posted you did a rear sway bar and you're "thinking" about the front? Get a front sway bar and adjustable endlinks so you'll go around corners flat. You don't want coilovers, how about Tokico D Spec shocks that are adjustable? Thinking about HFCs, that's a good way to pickup 8 whp but if you have a OE exhaust you won't like the rasp they create. It's like putting 1 lb of **** in an 8 oz. cup. You're not even close to running out of mods and you've been here long enough to see what works and what doesn't!
Gary
I don't have a stock exhaust. I also don't want coilovers. There's no point if I like the way the pro kit rides. Coilovers are really only for if you want adjustability. My whole suspension is modded out. Only thing I'm looking for now is chassis bracing.
 
Reply
Old Oct 9, 2014 | 10:11 AM
  #19  
Mustang5L5's Avatar
Registered User
iTrader: (1)
Joined: Jul 2005
Posts: 8,818
Likes: 468
From: Taxachusetts
That's when you just drive the car and enjoy
 
Reply
Old Oct 9, 2014 | 10:13 AM
  #20  
ScraggleRock's Avatar
Thread Starter
|
Registered User
iTrader: (4)
Joined: Dec 2013
Posts: 6,811
Likes: 738
Originally Posted by Mustang5L5
That's when you just drive the car and enjoy
BOOOOORRRIING. haha jk

Maybe I'll paint my gas door black. That's probably worth 5hp.
 
Reply
Old Oct 9, 2014 | 10:45 AM
  #21  
Mustang5L5's Avatar
Registered User
iTrader: (1)
Joined: Jul 2005
Posts: 8,818
Likes: 468
From: Taxachusetts
7HP if you do flat black
 
Reply
Old Oct 9, 2014 | 12:32 PM
  #22  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
Originally Posted by Gdirtyfive55
I don't have a stock exhaust. I also don't want coilovers. There's no point if I like the way the pro kit rides. Coilovers are really only for if you want adjustability. My whole suspension is modded out. Only thing I'm looking for now is chassis bracing.
Aftermarket exhaust? Next mod should be HFCs, I suggest Fast Intentions! Your whole suspension is modded? Why are you thinking about a front sway bar?
Gary
 
Reply
Old Oct 9, 2014 | 04:28 PM
  #23  
ScraggleRock's Avatar
Thread Starter
|
Registered User
iTrader: (4)
Joined: Dec 2013
Posts: 6,811
Likes: 738
Originally Posted by gary c
Aftermarket exhaust? Next mod should be HFCs, I suggest Fast Intentions! Your whole suspension is modded? Why are you thinking about a front sway bar?
Gary
Yeah, I'm still figuring out if I want HFCs. If they won't pass smog I don't want em. The only part of my suspension that is stock is the front sway bar at this point. The rear one is the weak point, the front one is pretty beefy stock. Still on the fence. Anywho..yeah, chassis bracing is my next thaaang. Well after I get the new stereo and shib all installed.
 
Reply
Old Oct 9, 2014 | 06:27 PM
  #24  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
HFCs are not legal in CA., however they make our G35s sound so good it's a shame not to enjoy what they create. Switching from HFCs to OEs and back is all that's required every two years...Gary
 
Reply
Old Oct 9, 2014 | 06:43 PM
  #25  
Shawno72's Avatar
Registered User
iTrader: (11)
Joined: Oct 2013
Posts: 1,254
Likes: 78
From: Cali
Originally Posted by gary c
HFCs are not legal in CA., however they make our G35s sound so good it's a shame not to enjoy what they create. Switching from HFCs to OEs and back is all that's required every two years...Gary
And it's so simple to do evey other year. I gotta say I am definitely enjoying my lousy $200 investment in some used hfc's. It's a night and day difference on the way my Invidia gemini system sounds.
 
Reply
Old Oct 9, 2014 | 09:03 PM
  #26  
herrschaft's Avatar
Registered User
iTrader: (18)
Joined: Jul 2009
Posts: 7,739
Likes: 771
From: Coast
No more mods???
Just about everything is illegal in CA. Like mentioned above, just swap the HFC's out when need be. Front sway bars are relatively cheap and are an improvement over stock. Might as well get one since it is also very easy to install.

Do a wire tuck, that will keep you occupied for a while.
 
Reply
Old Oct 9, 2014 | 10:09 PM
  #27  
ScraggleRock's Avatar
Thread Starter
|
Registered User
iTrader: (4)
Joined: Dec 2013
Posts: 6,811
Likes: 738
Originally Posted by herrschaft
No more mods???
Just about everything is illegal in CA. Like mentioned above, just swap the HFC's out when need be. Front sway bars are relatively cheap and are an improvement over stock. Might as well get one since it is also very easy to install.

Do a wire tuck, that will keep you occupied for a while.
Well, I know this isn't a popular stance, but my stance on HFCs isn't necessarily about switching em out during smog time, its actual emissions. I don't really wanna run them if they don't do a good job of burning emissions.

Wire tuck and engine dressing will probably become a thing tho. Like jersey said, I'll smoke some crack and get a wire brush.
 
Reply
Old Oct 9, 2014 | 10:15 PM
  #28  
herrschaft's Avatar
Registered User
iTrader: (18)
Joined: Jul 2009
Posts: 7,739
Likes: 771
From: Coast
Understandable.
Easy solution, a hot turbo does a good job at burning off the pollutants in exhaust gases too
 
Reply
Old Oct 9, 2014 | 10:29 PM
  #29  
Lartytiejdke3's Avatar
Banned
iTrader: (6)
Joined: Aug 2011
Posts: 244
Likes: 989
Originally Posted by Gdirtyfive55
Well, I know this isn't a popular stance, but my stance on HFCs isn't necessarily about switching em out during smog time, its actual emissions. I don't really wanna run them if they don't do a good job of burning emissions. Wire tuck and engine dressing will probably become a thing tho. Like jersey said, I'll smoke some crack and get a wire brush.
me and my busted knuckles wish it was that easy..
 
Reply
Old Oct 9, 2014 | 10:47 PM
  #30  
Urbanengineer's Avatar
Super Moderator
10 Year Member
Liked
Community Favorite
iTrader: (3)
Joined: Jun 2013
Posts: 11,174
Likes: 1,045
From: OH-IO
Premier Member

Originally Posted by jerseytaylor
me and my busted knuckles wish it was that easy..
Is getting in a fight related to polishing your engine materials?
 
Reply

Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 07:39 AM.