Possible Camshaft sensor gone
Try resetting the ecu . If that dont work double check Your oil level, and make sure the sensor and connection is snug . Check Your timing.
If light comes back on pull the codes again
Next charge the battery, and have the starter checked out like someone said. If all that is ok then check for a bad ground or short
Keep us posted .gl
If light comes back on pull the codes again
Next charge the battery, and have the starter checked out like someone said. If all that is ok then check for a bad ground or short
Keep us posted .gl
Last edited by Siciliang35; Apr 6, 2015 at 10:50 AM.
Yes we went thru the sensor dance and no luck. His car was actually not starting all the time tho. Try swapping the other cam sensor on that side with ur brother. This one is like on the exhaust cam and has a angled connector.
Reset the ecu multiple times to no avail. Charged the battery still nothing. Check timing how ? Light comes on and it's the same code. I'll get the starter checked out too and God the ground. Yes I will try the other sensor too but being as it pulled bank one I believe the bank 2 wouldn't trip it but I'll try it.
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
Dec 18, 2018 05:43 PM





