Headlight doesn't work

Subscribe
Apr 18, 2019 | 09:59 AM
  #1  
Hi guys, recently I posted topic about problem I had on my g35;
Well there is another issue now. Passenger headlight doesn't work, so I got a bulb, replaced and boom still doesn't work. I went to purchasing ballast and at some point before I didn't get ballast it start works again and again stop. I still didn't replace ballast because I were waiting for my friend to help me out but I m gonna probably do that by myself bc I wanna save some money. Mechanic asking for 120 only labor (LoL).
My question is, what I should test before I did change ballast because it could be maybe wire problem and should I remove bumper to do change or only that plastic under the headlight and then I 'll be able to replace it.

Thanks guys,
Reply 0
Apr 18, 2019 | 12:05 PM
  #2  
Sounds like a ballast problem. U will have to remove the headlight in order to change the ballast.
Reply 1
Apr 18, 2019 | 12:08 PM
  #3  
Swap the ballast and lamp that are working to the side that's not working. Then you can verify it's a wiring/electrical problem
Reply 1
Apr 18, 2019 | 11:05 PM
  #4  
Quote: Swap the ballast and lamp that are working to the side that's not working. Then you can verify it's a wiring/electrical problem
Same thing is occurring to me with my driver side headlight. Replaced the headlight, bulb, ballast & even tested the ballast on the passenger side and it worked. Thinking it’s a short to ground.
Reply 0
Jul 4, 2019 | 07:08 PM
  #5  
After over 2 months replaced ballast. In order to replaced i remove wheel, then that plastic and it was really hard to reach old ballast. 2 screws were removed easily but 3rd one had to break. Cable on a new ballast was to short so i has to use old cable for bulb.

Headlight is working now but i got check engine light...
Reply 0
Jul 4, 2019 | 07:49 PM
  #6  
OBD2 scan for codes, probably unrelated to the ballast.
Reply 0
Jul 5, 2019 | 02:15 PM
  #7  
Quote: OBD2 scan for codes, probably unrelated to the ballast.
P1065, related to ECU but didn't have that before i changed ballast.

I will try just with reset and see what's gonna happen.
Reply 0
Jul 5, 2019 | 02:21 PM
  #8  
By chance did you do this work with the battery still connected? If so you should start checking every single fuse starting at the fusible link because something probably blew.
Reply 0
Jul 5, 2019 | 02:22 PM
  #9  
Quote: By chance did you do this work with the battery still connected? If so you should start checking every single fuse starting at the fusible link because something probably blew.
Battery was disconnected. I will check it, thanks
Reply 0
Jul 5, 2019 | 02:31 PM
  #10  
Have you tried deleting the code to see if it comes back?
Reply 0
Jul 10, 2019 | 12:33 AM
  #11  
Quote: Have you tried deleting the code to see if it comes back?
On sunday, i was trying to fix air bag light what is also common isue on g35 because they have recalls on connectors under passenger seats. At that time battery was disconnected so check engine code dissapear. But air bag light is still there. I follow instructions from youtube with disconecting and conecting few times and using dielectric grease but air bag light come back. Also after i cut zip tie on that connector i couldnt connect plug in that there again so i had to use zip ties again. Those connectors are really shame for infiniti...
Reply 0
Subscribe