Ok,
I have debadged many of motorcycles, jet-ski's, etc......but never a car. Especially a G35. How do you do it in a clean, safe, manner? On a motorcycle you would use a hair dryer or heat gun, is it the same way with cars? I looked at mine yesterday and the G35 emblem is on there pretty damn snug. HELP..........thanks in advance........MASTERSR6

 

You might wanna check in the performance section...

 

Why would I want to do that? Oh thats right, stickers and emblems and more horsepower, which = performance section!
Thanks for bringing me to my senses!!!! lol!!!

 

Let me see if I can find it.. Thought I seen something on it in that section which is why I brought it up

 

Your cool man, no prob. It's real easy and took me about 10 minutes total. You need a hair dryer, some floss, and some type of paint friendly cleaner like Goof-Off. Just use the hair dryer on the lettering until they become hot. This will ensure the sticky foam tape under them will become viscous. Then just squeeze the floss in between the lettering and the surface and use a sawing motion back and forth while pulling the floss downward. The letters should just pop off. I was actually able to get most of the foam tape off with the letters as well. If there is any foam tape residue left over on the paint you can probably peel most of it off with your hand. For the rest of the "gunk" just use the Goof-Off or othre paint friendly cleaner. It should come off real easy since most of the G's are fairly new. After that I recommend using a cleaner wax on the area and then re-apply some carnuba wax from zymol or Meguars. Hope that helps out. Peace. [img]/w3timages/icons/smile.gif[/img]

-Jason
Laser Red '03 6MT

 

Found more information:

https://g35driver.com/forums/showfla...&part=all&vc=1

 

it took me 10 seconds to debage the "g35" sticker...i used this special tool, i think its called "my hand"
hehe
just use your hand and fingers and be gentle. They come off pretty easily (3M 2-way spongy tape)

<font color=green>-Rambo</font color=green>
G35c 6MT DG/Willow

 

LMAO--you are exactly right!! I will not advertise for INFINITI, and help them sell cars......I mean maybe if they would've hooked me up a little bit on the price then I would leave my license plate bracket on and help advertise there dealership.....but NO WAY now, plus I liked that real clean look that was posted a couple of days ago, by taking off just the g35. Anyways, thanks for ya'lls help.....peace

 

Mine didn't come with a G35 "sticker", mine came equiped with a G35 emblem "sparklin crome look" !!! I must be more special then you........hehehehehej/k Thanks for the advice, I didn't know if I should do it like that, didn't want to mess up my paint..................MASTERSR6

 

Talk about some hardcore anti advertising people.You should of checked with Infiniti in the first place to see how much they would of taken off the sticker price if you bought the car without the badges ;-) j/k

Can you even put the badges back on once you take them off?

 

Sure you can, just buy some of that 3M stuff Rambo was talking about. Just cut them out nice and neat and stick em back on...........

 

hmm... now im thinking of doing this... well just the G35...

Kinda make's the back look unbalanced since everything else is all centered out... Ahhhh I just might =)

 

do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it do it

hahaha this was my first official "mod" when i took the car home from the dealership, my second "mod" was to remove the dealer's license plate holder [img]/w3timages/icons/smile.gif[/img]

<font color=green>-Rambo</font color=green>
G35c 6MT DG/Willow