G35 Lowering
#1
G35 Lowering
im a newbie so i need lots of information!
imma start with lowering question.
if i wanna lower my G..
only thing i have to get is those springs (teins)?
or do i have to get the whole set ..which is camber and everything..?
if i only use springs to drop it.then later on, am i gonna have those feathering problems? or any suspension problems??
thanks.
imma start with lowering question.
if i wanna lower my G..
only thing i have to get is those springs (teins)?
or do i have to get the whole set ..which is camber and everything..?
if i only use springs to drop it.then later on, am i gonna have those feathering problems? or any suspension problems??
thanks.
#2
Former G35driver Vendor
iTrader: (30)
Join Date: Dec 2004
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blackcode
im a newbie so i need lots of information!
imma start with lowering question.
if i wanna lower my G..
only thing i have to get is those springs (teins)?
or do i have to get the whole set ..which is camber and everything..?
if i only use springs to drop it.then later on, am i gonna have those feathering problems? or any suspension problems??
thanks.
imma start with lowering question.
if i wanna lower my G..
only thing i have to get is those springs (teins)?
or do i have to get the whole set ..which is camber and everything..?
if i only use springs to drop it.then later on, am i gonna have those feathering problems? or any suspension problems??
thanks.
There's actually alot of options for lowering the G: http://www.intensepower.com/suspension5.html . We definetly sell Tein the most, however, and I think you will see people telling you the same thing. To lower the car, you just need aftermarket springs. When you lower a vehicle, you create negative camber. That means, that the contact patch on your tires wears more on the inside of your tire, instead of the majority of the flat surface of the tire tread. What this does is makes the tires wear faster, because the contact patch on the pavement is very narrow. Fortunately, there are a few products that are produced by quality manufacturers to aleviate this issue. First, for the front, you can go with Stillen: http://www.intensepower.com/stfrcaad35g3.html . Also, we don't have these on our site yet, but Cusco also makes the same product, but for alot less money: $425.00. We have 2 sets in stock actually. For the rear, you can go with either Stillen: http://www.intensepower.com/sostrecaad35.html . Or, JIC: http://www.intensepower.com/jicmaadrecal.html . I would venture to say, that while most G enthusiasts lower their cars (and some extremely) they don't buy any of these products to correct their negative camber. It's not a must, but it will save tire life. Also, alot of people out there are lowering their cars soo much, and going with wide 19" or 20" wheels, that there's not much to adjust. Meaning, when you that wide, and that low, you can only correct the negative camber so much before your tire hits the inside of the wheel well. Not to make this complicated. If you're just looking for springs, which is what most people get, then you shouldn't have any of those issues. I suggest Tein products, but any of the products we have on our website to lower your car are high quality. Hope this helps. Please call us if you have any questions.
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
Last edited by INTENSEPOWER; 05-18-2005 at 11:02 PM.
#4
Registered User
iTrader: (1)
Join Date: Jul 2004
Location: 21°18'54.33" N, 158°05'55.47" W
Posts: 2,475
Likes: 0
Received 0 Likes
on
0 Posts
lower your car the right way.
buy a set of coilovers where the height adjustment is separate of the preload coil adjustment. then you can dial in the suspension damping and preload to suit the height variance. It costs a bit more money vs typical low end coilovers and coilover sleeves, but it's the RIGHT way to go on and about setting up your suspension. JIC and TEIN make good setups, but they dont float my boat. They're trendy in a sense, I dont really care much about them. I have a set of Silk Road:Section Spec RM/A8 coilovers. I havent installed them yet, but they have the qualities of a good coilover system, IMO better than TEIN and JIC. Check them out, www.silkroad-usa.com. If you wanna go overkill, go with Zeal Fucntion V6 Swift Coilovers
buy a set of coilovers where the height adjustment is separate of the preload coil adjustment. then you can dial in the suspension damping and preload to suit the height variance. It costs a bit more money vs typical low end coilovers and coilover sleeves, but it's the RIGHT way to go on and about setting up your suspension. JIC and TEIN make good setups, but they dont float my boat. They're trendy in a sense, I dont really care much about them. I have a set of Silk Road:Section Spec RM/A8 coilovers. I havent installed them yet, but they have the qualities of a good coilover system, IMO better than TEIN and JIC. Check them out, www.silkroad-usa.com. If you wanna go overkill, go with Zeal Fucntion V6 Swift Coilovers
Last edited by 636Racer; 05-19-2005 at 12:51 AM.
#5
The search button works great for this. There should be tons of info. My advice is to do your homework.
I'm dropped on HKS Hypermax RS Adjustable Coilovers. 350evo a-arms for the front camber. SPC toe bolts and Kinetix camber arms for the rear. I've got mine set kinda "soft" to preserve daily driveability. Looks great and handles great. Not the cheapest route, but the best for my purposes.
Lot's of people are going with Tein 350Z H-Techs and Tokico shocks. I used to have this setup, but didn't like the progressive spring in the front.
I'm dropped on HKS Hypermax RS Adjustable Coilovers. 350evo a-arms for the front camber. SPC toe bolts and Kinetix camber arms for the rear. I've got mine set kinda "soft" to preserve daily driveability. Looks great and handles great. Not the cheapest route, but the best for my purposes.
Lot's of people are going with Tein 350Z H-Techs and Tokico shocks. I used to have this setup, but didn't like the progressive spring in the front.
#7
Trending Topics
#10
#12
#14
Former G35driver Vendor
iTrader: (30)
Join Date: Dec 2004
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheGest
good advice, would i need a camber kit with coilovers
#15
Former G35driver Vendor
iTrader: (30)
Join Date: Dec 2004
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by samkws
the G35 coupe is already so low even with stock setup, is it gonna be better in ride and feel with the drop?