hey guyz
#1
#2
#3
#4
#5
#7
For the 05's you use the small button by your gauges to change/set the rev light. Pressing the button scrolls through tripometer A, tripometer B and then your rev light RPM. My dealer changed mine from the factory set 8000 to like 3000 and it was coming on ALL the time. Once you see the RPM press and hold the button for a few seconds and then the RPM will blink. Now you can change it.
Trending Topics
#8
#9
#10
There is a red light below it that blinks when you are within 500 RPMS of a RPM that you set. When you reach the designated RPM the light turns solid. You set the RPM on the odometer, hit the black button on the dash untill you get through A trip, and B trip, then you will be at the RPM. Press and hold the blaack button and the number will blink, you can hold the button to increase the rpm level, then release the button and it will store the number. Press the black button again once the RPM stops blinking to return to your trip distance.
Hope that helps
-Mike
Hope that helps
-Mike
#11
Thread
Thread Starter
Forum
Replies
Last Post