BMW style Fin on 06' sedans
#1
BMW style Fin on 06' sedans
Hey guys, wuts up, i'm planning on getting my roof painted black like Vodka and Gdup, but i have the sirius/xm antenna on my roof, i don't mind it, but i was wondering if anyone knew where i could get the 06' roof fin for my car, it looks like the ones on all the german cars have, thanx guys
#2
#3
Heyy, the part number for the Shark fin cover is INF 28228-EH004 its about 10 dollars and comes in any paint color in the 05-06 colors. You need the inside SAT attena and that part number is INF 28208-EH100 and thats about 40 dollars. If your not using it as an anttena and just for looks you will have to use a dremmel and take off the metal peice that exstends downward into the roof. Then it will be flat and just use some Epoxy and your good to go. If your going to use the attena for your SAT radio then you will need to drill a hole into the roof for the install. Ohh and if you do drill, you will need the nut to secure the antenna and that part number is INF 28219-ED000, hope this helps
#5
Originally Posted by Surfed80
Heyy, the part number for the Shark fin cover is INF 28228-EH004 its about 10 dollars and comes in any paint color in the 05-06 colors. You need the inside SAT attena and that part number is INF 28208-EH100 and thats about 40 dollars. If your not using it as an anttena and just for looks you will have to use a dremmel and take off the metal peice that exstends downward into the roof. Then it will be flat and just use some Epoxy and your good to go. If your going to use the attena for your SAT radio then you will need to drill a hole into the roof for the install. Ohh and if you do drill, you will need the nut to secure the antenna and that part number is INF 28219-ED000, hope this helps
Great info, thank you!
#6
#7
Originally Posted by Surfed80
Heyy, the part number for the Shark fin cover is INF 28228-EH004 its about 10 dollars and comes in any paint color in the 05-06 colors. You need the inside SAT attena and that part number is INF 28208-EH100 and thats about 40 dollars. If your not using it as an anttena and just for looks you will have to use a dremmel and take off the metal peice that exstends downward into the roof. Then it will be flat and just use some Epoxy and your good to go. If your going to use the attena for your SAT radio then you will need to drill a hole into the roof for the install. Ohh and if you do drill, you will need the nut to secure the antenna and that part number is INF 28219-ED000, hope this helps
Trending Topics
#9
Originally Posted by Surfed80
Heyy, the part number for the Shark fin cover is INF 28228-EH004 its about 10 dollars and comes in any paint color in the 05-06 colors. You need the inside SAT attena and that part number is INF 28208-EH100 and thats about 40 dollars. If your not using it as an anttena and just for looks you will have to use a dremmel and take off the metal peice that exstends downward into the roof. Then it will be flat and just use some Epoxy and your good to go. If your going to use the attena for your SAT radio then you will need to drill a hole into the roof for the install. Ohh and if you do drill, you will need the nut to secure the antenna and that part number is INF 28219-ED000, hope this helps
#10
#12
Yeahh it will work for any factory SAT set up I would imagine, it would take some fabrication of the wiring for a non factory set up to use the shark fin but you would have to take a look at the plug for the antenna to see what you could do with it... Pics... just look arround, the M35/45 has the same shark fin as the G, its the same part number too...
#14
#15