She has twins, greddy twins that is...
#2222
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Working on a few new things.
Installed an AEM water/meth kit but still need to get it tuned. Got it mostly for the hot Phoenix summers.
Picked up a pair of 14" SPAL curved blade fans and made a custom shroud for them. They just barely clear the alternator pulley!
A Qualife Helical LSD came in yesterday.
Installed an AEM water/meth kit but still need to get it tuned. Got it mostly for the hot Phoenix summers.
Picked up a pair of 14" SPAL curved blade fans and made a custom shroud for them. They just barely clear the alternator pulley!
A Qualife Helical LSD came in yesterday.
#2225
So quick question Tim... You have 20X8.5 and 20X10 +40 if i'm not mistaken. You also have coilovers too. Can you carry 3 passengers and not rub? Also assuming I had stock suspension and my rear tires were 275/35 would I rub with/without passengers. I own a stock 2003 g35 sedan. Thanks for the help.
#2227
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
So quick question Tim... You have 20X8.5 and 20X10 +40 if i'm not mistaken. You also have coilovers too. Can you carry 3 passengers and not rub? Also assuming I had stock suspension and my rear tires were 275/35 would I rub with/without passengers. I own a stock 2003 g35 sedan. Thanks for the help.
On stock suspension I still doubt you would rub. They will look like they stick out more but should tuck when you hit bumps.
#2228
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
#2230
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
#2234
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
I am going to widen out my rear end one of these days but I know the car will be down for a while (DIY). I just sent a request to iForged to see if they can re-barrel my wheels since they are 2-pc, not 3 and would need re-welded. I'm not sure if I want to change my hood or just vent the existing one. I need function and like the oem hood lines.