So Im thinking about changing my POP Charger out for a AEM 21-209EDK. Im wanting to go with a dry filter. I already had my Amsoil guy check and they dont make one in that size so... My question is does anyone have any advise experince or expertise on these or others that may be better. I know Ive seen something about these before but I dont recall if it was good or bad. And if anyone knows of a good place to get one Ive seen them as low as about $43.00 plus shipping so far from Summit Racing.

Thanks

 

If the AEM is the same as the Apexi dry, then it's a great filter. But you can't clean it. So you have to buy one every xxxx miles.

I remember measuring out an Ea Amsoil cone filter and I think I found one that was close. A tad longer if I remember. I have the stillen so fitment is tight. but I think you have more leeway with the JWT?

 

How often are y'all cleaning the JWT popcharger I've had it for a year and it's clean as can be...

 

Ive had mine for about a little over a year and mines dirty and needs cleaned that why I was thinking about changing. Yes Jeff you can clean these. Heres a link to the AEM site.

http://www.aempower.com/ViewCategory.aspx?CategoryID=93

 

I bought an AEM Dryflow for my Stillen CAI. When I bought it, the AEM part number was 21-209DK, so I don't know what the difference is with the 21-209EDK part number. The AEM fit fine over the Stillen ring and have no problems.

The only thing is that cleaning requires the entire 2 bottles from the Filter Cleaning kit which are about $8 per kit but not a big deal.