My G35 Pics ! Plus Dual Xenon Install
#1
Joined: Oct 2007
Posts: 957
Likes: 2
From: South Florida
My G35 Pics ! Plus Dual Xenon Install
My 03.5 G35
I joined the forum a few weeks ago but i came over from the sr20forum, so i have my fair share of knowledge of Nissans.
I took some pics and Today and did a dual xenon retrofit.
I took some Maxima Xenon bulbs and ballast with ignitors and removed my stock hallogen bulb and installed the maxima xenon in there. the fit was snug but drilling in 3 screws aroun d the sides to bolt it down worked wonders.
about a 3 hour install to do it right. here ya go.
another
http://i151.photobucket.com/albums/s...r/PICT0034.jpg
side
http://i151.photobucket.com/albums/s...PICT0022-1.jpg
interior
http://i151.photobucket.com/albums/s...PICT0019-1.jpg
I joined the forum a few weeks ago but i came over from the sr20forum, so i have my fair share of knowledge of Nissans.
I took some pics and Today and did a dual xenon retrofit.
I took some Maxima Xenon bulbs and ballast with ignitors and removed my stock hallogen bulb and installed the maxima xenon in there. the fit was snug but drilling in 3 screws aroun d the sides to bolt it down worked wonders.
about a 3 hour install to do it right. here ya go.
another
http://i151.photobucket.com/albums/s...r/PICT0034.jpg
side
http://i151.photobucket.com/albums/s...PICT0022-1.jpg
interior
http://i151.photobucket.com/albums/s...PICT0019-1.jpg
#4
Joined: Oct 2007
Posts: 957
Likes: 2
From: South Florida
HID instal
here is a DIY pics.. remove the grill and wheel , thw wheel well splash gaurds by poping out the screw clips and 5 bolts under splash gaurd
next romve the wheel well fender cover
http://i151.photobucket.com/albums/s...PICT0017-3.jpg
remove old bulb and cut its harness you need to rewire it .
Yellow is power and red is high beam and the black is ground.
http://i151.photobucket.com/albums/s...PICT0018-1.jpg
next wire the red plug from the hid to the factory yellow and black to black. refer to pic
http://i151.photobucket.com/albums/s...r/PICT0020.jpg
next test for power
http://i151.photobucket.com/albums/s...PICT0016-1.jpg
after it lights up Dual Xenon , with out retro fiting projectors.
http://i151.photobucket.com/albums/s...PICT0021-1.jpg
another
http://i151.photobucket.com/albums/s...PICT0022-2.jpg
and 1 more
http://i151.photobucket.com/albums/s...r/PICT0023.jpg
i will post some night ones later
next romve the wheel well fender cover
http://i151.photobucket.com/albums/s...PICT0017-3.jpg
remove old bulb and cut its harness you need to rewire it .
Yellow is power and red is high beam and the black is ground.
http://i151.photobucket.com/albums/s...PICT0018-1.jpg
next wire the red plug from the hid to the factory yellow and black to black. refer to pic
http://i151.photobucket.com/albums/s...r/PICT0020.jpg
next test for power
http://i151.photobucket.com/albums/s...PICT0016-1.jpg
after it lights up Dual Xenon , with out retro fiting projectors.
http://i151.photobucket.com/albums/s...PICT0021-1.jpg
another
http://i151.photobucket.com/albums/s...PICT0022-2.jpg
and 1 more
http://i151.photobucket.com/albums/s...r/PICT0023.jpg
i will post some night ones later
Last edited by Rodrigo; 11-23-2007 at 05:30 PM.
#5
i see...so you retrofitted maxima d2r xenon bulbs, ballasts, igniters into the stock fog/high halogen bulb housing.
nice job, it should improve your visibility, especially with high beam on. having the fogs on with the low beam will probably cause significant amounts of glare for oncoming traffic though, since the housing wasn't designed for HID light output.
nice job, it should improve your visibility, especially with high beam on. having the fogs on with the low beam will probably cause significant amounts of glare for oncoming traffic though, since the housing wasn't designed for HID light output.
#6
Joined: Oct 2007
Posts: 957
Likes: 2
From: South Florida
Originally Posted by patman530
i see...so you retrofitted maxima d2r xenon bulbs, ballasts, igniters into the stock fog/high halogen bulb housing.
nice job, it should improve your visibility, especially with high beam on. having the fogs on with the low beam will probably cause significant amounts of glare for oncoming traffic though, since the housing wasn't designed for HID light output.
nice job, it should improve your visibility, especially with high beam on. having the fogs on with the low beam will probably cause significant amounts of glare for oncoming traffic though, since the housing wasn't designed for HID light output.
thats correct my friend,
can some one fix my links so that the show the pics please.
#7
Trending Topics
#14
Joined: Oct 2007
Posts: 957
Likes: 2
From: South Florida