!!Look here before starting a new thread!! 2003-2006 Sedan FAQ's

Subscribe
Jan 8, 2008 | 09:22 PM
  #31  
This thread is the **** Tim! Great info, and sticky fo sho!
Reply 0
Jan 8, 2008 | 09:54 PM
  #32  
Great job Tim! Thanks for all your help and work on this forum. This FAQ is very helpful. Another question that may be asked is:

Q: Can I debadge the emblems on the rear of my 1st gen sedan?
A: Yes - except for the mount fuji emblem which has rivets (holes). The other "INFINITI" and "G35" lettering is attached by double sided tape and can be easily removed.
Reply 0
Jan 8, 2008 | 10:42 PM
  #33  
wait hold up the REVUP engine REQUIRES PREMIUM!?!?!?! what if havent followed this occasionally...
Reply 0
Jan 8, 2008 | 11:17 PM
  #34  
Great job Tim for writing up the FAQ section for the sedan forum. I'm sure this will become one of the most sought-after threads for the sedan members

I would like to add another body kit option for the 03/04 sedan, and that is the one made by Stillen which includes the front chin spoiler, side skirts and the rear valence. You can find plenty of info on it on the Stillen website (http://www.stillen.com), and oh yeah for a limited time they are running a special 10% discount on the body kit!
Reply 0
Jan 8, 2008 | 11:47 PM
  #35  
i think you should spend more time on modding more parts of the sedan.... great thread tim
Reply 0
Jan 9, 2008 | 12:15 AM
  #36  
Tim, appreciate the hard work and time you put in developing this thread. This should be on every new sedan owner's required reading list! Awesome job!
Reply 0
Jan 9, 2008 | 02:33 AM
  #37  
Quote: WOW!!!! holly cr@p Tim, what an undertaking... nice job!

(but did you have time to look at your taillights? )

No not yet. I did this while I was at work and got home late. Now I have to be back 1st thing for a meeting. I will look this week, I promise.
Reply 0
Jan 9, 2008 | 02:36 AM
  #38  
Quote: Great job Tim! Thanks for all your help and work on this forum. This FAQ is very helpful. Another question that may be asked is:

Q: Can I debadge the emblems on the rear of my 1st gen sedan?
A: Yes - except for the mount fuji emblem which has rivets (holes). The other "INFINITI" and "G35" lettering is attached by double sided tape and can be easily removed.
Quote: Great job Tim for writing up the FAQ section for the sedan forum. I'm sure this will become one of the most sought-after threads for the sedan members

I would like to add another body kit option for the 03/04 sedan, and that is the one made by Stillen which includes the front chin spoiler, side skirts and the rear valence. You can find plenty of info on it on the Stillen website (http://www.stillen.com), and oh yeah for a limited time they are running a special 10% discount on the body kit!


Ahh good ones!
Both are added.
Reply 0
Jan 9, 2008 | 01:19 PM
  #39  
Quote: Great job Tim! Thanks for all your help and work on this forum. This FAQ is very helpful. Another question that may be asked is:

Q: Can I debadge the emblems on the rear of my 1st gen sedan?
A: Yes - except for the mount fuji emblem which has rivets (holes). The other "INFINITI" and "G35" lettering is attached by double sided tape and can be easily removed.
Except if its an 03.0 (doggy door) sedan
There are indentions under the INFINITI badging
Reply 0
Jan 9, 2008 | 01:35 PM
  #40  
Tim, you forgot to add "comes painted" for the Aero/Nismo body kit.

One other thing that comes to mind that I've seen recently and in the past....door moldings on the sedan.

Q: Can the door moldings be removed?
A: Yes - But be aware that there are two holes per door under the moldings. The moldings themselves are held on with double sided tape and "pins" that go inside the holes in the door to keep them straight / in place.

You can re-word it or whatever....I'm no poet if you feel it should make the cut.

Thanks
Reply 0
Jan 9, 2008 | 02:05 PM
  #41  
Quote: Tim, you forgot to add "comes painted" for the Aero/Nismo body kit.

One other thing that comes to mind that I've seen recently and in the past....door moldings on the sedan.

Q: Can the door moldings be removed?
A: Yes - But be aware that there are two holes per door under the moldings. The moldings themselves are held on with double sided tape and "pins" that go inside the holes in the door to keep them straight / in place.

You can re-word it or whatever....I'm no poet if you feel it should make the cut.

Thanks

Yeah I'll add it. Anything to save moving another thread or having random people get more pissed at me.
Reply 0
Jan 9, 2008 | 02:29 PM
  #42  
^Thanks Tim! That's effin great
Reply 0
Jan 9, 2008 | 08:28 PM
  #43  
Quote: Except if its an 03.0 (doggy door) sedan
There are indentions under the INFINITI badging
Thanks G35papa! Forgot about the doggy door sedans...
Reply 0
Jan 9, 2008 | 10:31 PM
  #44  
Quote: Thanks G35papa! Forgot about the doggy door sedans...
Never forget the "doggie doors"... they are the god fathers!!!
Reply 0
Jan 10, 2008 | 11:30 AM
  #45  
Quote: Thanks G35papa! Forgot about the doggy door sedans...
No problem superkid . I will eventually be getting rid of my doggy door as well so I will forget about it from then on too

Quote: Never forget the "doggie doors"... they are the god fathers!!!
lol...respect your elders
Reply 0