nice... are those 18" sport or 19" rays wheels... are you using the OEM shocks... what year springs are those... looks good bro!

 

Thanks man. 18s, stock struts, not sure what year 350 they came of off

 

Questions
1 I put on coilovers and dropped my sedan about 2 1/2 inches and I'm getting a creeking noise when I come to a stop. Do you guys have to change anything after adding coilovers? Bushings/ Compression rods/ control arms should they change one of theses....Do I need an algihnment after you drop a car? It sways at around 40 left and right... all help is appreciated

 

Here is my G/Z suspension swap contribution:

 

My Tein Basics, little bit left in the rear..

 

From NGC Fredrickburge Va Meet 2011




Not My car but it's hot...

 

^Love the 370z wheels.

 

Word!

 

Those 370z wheels look absolutely Sick on a 2nd gen sedan!

 

^I agree

 

+2

Some very sexy sedans!


bryman<-----needs lowered to avoid embarrassing wheel gap

 

Question for sedan owners running 350z HTechs. Camber kit required to get the alignment in spec??

 

350z Tein S Techs and Tokico DSP-9's on they way! I'll post pics once they arrive and I get them on the G. It should be roughly a 1.7F/1.6R drop once it's all said and done

 

Well, as a general rule, camber won't quiiiiiite go back into "spec" even with OEM 350Z springs... so any lower than that is almost certainly a "no".

That being said, from what I've heard, a G35 Sedan running OEM Z springs will go into the slightly more aggressive 350Z specs.

 

Im running OEM Z springs now. Want to go a little lower but if Im going to need a camber kit then Ill hold off on buying the springs until later.