G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Offset Officials please chime in!!!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 3, 2009 | 12:42 AM
  #1  
wilboytsk's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Oct 2005
Posts: 239
Likes: 0
From: so cal sd
Offset Officials please chime in!!!

Need a quick answer fellas..
I'm dropped on tein htechs/sedan running 19x8.5 w a 40 offset

found a set of 18s with the following specs:

size : 18 x 9.5 inches wide
offset: +30 and +25 staggered look
bolt pattern 5 X 114.3


How will these look and are they even worth getting...any info is much appreciated. Thanks!!!
 
Reply
Old Jul 3, 2009 | 12:47 AM
  #2  
Jeff92se's Avatar
Red Card Crew
iTrader: (24)
Joined: May 2005
Posts: 37,810
Likes: 585
From: ɐʍ 'ǝlʇʇɐǝs
Premier Member

9.5" and 25mm might be a problem. I'm on 8.5" and 30mm and I don't have much to spare. Your 1/2" wider and 2.5mm wider on the outside. Well it might be close with the right tire and camber
 
Reply
Old Jul 3, 2009 | 04:16 AM
  #3  
BuckeyeInMI's Avatar
Registered User
iTrader: (5)
Joined: Nov 2008
Posts: 1,846
Likes: 34
From: Northern Lower Michigan
Coupe 18's are 8" and +30, and just about perfectly flush on a Sedan. Your fronts are .75" wider (each side) and 5mm farther out, so almost an inch farther out than mine. Too much in my book. The rears will be a better fit, but still not great.
 
Reply
Old Jul 3, 2009 | 04:21 AM
  #4  
FlyingLumpia's Avatar
Registered User
iTrader: (7)
Joined: Jul 2006
Posts: 3,284
Likes: 39
From: Washington State
Stretch a 245 on there and you will be good.
 
Reply
Old Jul 3, 2009 | 04:22 AM
  #5  
FlyingLumpia's Avatar
Registered User
iTrader: (7)
Joined: Jul 2006
Posts: 3,284
Likes: 39
From: Washington State
Also drop it more so you can have more camber.
 
Reply
Old Jul 4, 2009 | 05:09 AM
  #6  
wilboytsk's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Oct 2005
Posts: 239
Likes: 0
From: so cal sd
Thx fellas...going to stick to 19 m35's...can I go with a 265/35 in the rears without rolling the fenders?..i do have some neg. camber back there
 
Reply
Old Jul 4, 2009 | 05:41 AM
  #7  
OCG35's Avatar
Registered User
iTrader: (33)
Joined: Nov 2004
Posts: 17,181
Likes: 154
From: OC - So Cal
http://www.1010tires.com/WheelOffsetCalculator.asp
 
Reply
Old Jul 4, 2009 | 05:50 AM
  #8  
FlyingLumpia's Avatar
Registered User
iTrader: (7)
Joined: Jul 2006
Posts: 3,284
Likes: 39
From: Washington State
265 might alittle to wide for a 19x8.5
 
Reply
Old Jul 4, 2009 | 08:19 AM
  #9  
BuckeyeInMI's Avatar
Registered User
iTrader: (5)
Joined: Nov 2008
Posts: 1,846
Likes: 34
From: Northern Lower Michigan
Yes, a 265 is a little too wide for an 8.5", but it will fit. TurTLe* is running 265's on his Track Edition Wheels and they're 8.5" in the back.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
davizzle
Media Share G35 Coupe V35
23
May 22, 2022 09:26 AM
davizzle
Picture Share
23
Feb 4, 2018 12:41 PM
TurTLe*
G35 Sedan V35 2003-06
5
Sep 29, 2015 01:43 PM
DRG35R
General Tech Questions
4
Sep 16, 2015 05:33 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 09:59 AM.