When does a TB need to be cleaned? When you see gunk all over the inside?

 

What makes those look nice is the lip. Not sure how much lip you'll have with that offset though.
Got any pics?

^Yeah, that

 

http://miami.craigslist.org/mdc/pts/2185087553.html i dont really care for poke, with a nice flush i'll be happy

 

don't move the plate tho. you'll mess it up

 

^Well, my wheels aren't perfectly flush yet, and they're 19x8.5 +30 with 245/40
So to get the fronts to where mine are now, you'd need a 10mm spacer.... I'd think you'd want at least a 15.

My rears are the same, and just barely fit with no fender work.
Obviously, yours will be different because you're going with a staggered setup and a different sidewall height.

Just make sure and factor in the cost of spacers when deciding if it's a good deal or not.
I'm gonna step back and let the wheel fitment gurus take over now

 

so does it sound like it's worth going for?

 

Lol, Mine still is clean so was wondering after I saw some threads on people cleaning it with less mileage then me

I thought you just have to unplug the battery. This would be a no no with the battery connected right?

 

it would be a no no at all point and time. its the little gears in the tb that will get messed up. i had mine off the car and still messed it up

 

ive tried three times to post and itt never shows up. im trying from home now , if it works, ill post the question

 

^ it works lol

 

Important (quick response if possible) my clear corner won't stay on my uncle broke the metal prong like an idiot and I can't get it to stay secure and I don't see a place to zip tie it ..can someone help I don't do glue on cars

 

this isnt true... as long as you unplug the battery then unplug the tb actuator you can remove the tb and clean, moving the plate included.

I've done it many times - opening the plate as far as it goes cleaning both sides... no problem... many others have done this as well.

 

I don't remember how they're built right off hand, and I'm not at home so I can't check on mine... but can you remove the metal clip from your stock ones an put it on the clear corner?

 

anyone have experience with muteki lug nuts?

 

^4DGS does.