^ 05/06 needs the 03/04 hardware to mount the HKS and the MD mufflers. Not sure about the others.



(1) Mounting Assembly Part #20742M
(2) Rubber Mounts Part #20651M
(2) Bolts Part #081468252G


Handy-dandy Infiniti exhaust components schematic

 

is there a thread about custom interiors ?

 

nvm i found some

 

LOL. I was about to say "Yes, a few... but I'm not finding them for you"

 

lol after i found them i had to come back asap and say that i found them lol

 

cool avatar Ash

 

^Thanks Chris. Check out the last page of my build thread for the full rez version

 

NFSP ur painted head lights came really good care to explain what you did different you've made me brave enough to do this

 

^What, just paint? It's easy, follow Chris' DIY: https://g35driver.com/forums/lightin...eadlights.html

The retrofit on the other hand was a huge PITA

 

Ooo looked like 2 differemt out comes I was curious if you did anything different like paint prep work ect...

 

Just good photography

Nah I did similar prep work. Just make sure you are really careful and do your prep right, and you should be fine.

 

does the vq35de have any electronic throttle restriction or what? ive been looking at some plug and play tuners, and some offer throttle restriction removal and some dont, their websites dont really specify for the g35, only a general spec.

 

On the Gs it does. From the factory when you floor it the throttle body is programmed to only open the throttle plate 75%. One of the benefits from a tune like Osiris is it removes this restriction allowing the throttle plate to open 100% when floored. It allows for immediate throttle response and eliminates the "lag" that's so irritating.

 

Is that for 6MT and 5AT? I've never noticed any lag. Hmm

 

my car runs a bit rich i believe (black smoke at wot) i was hoping to correct it with a tune, i would love to get osiris but i can get a plug and play for less than 400 right now, hypertech or bullydog. not sure how good either of these are, i have ART pipes and full MD exhaust with popcharger, z-tube, 5/16th spacer, any ideas would be helpfull.......