Random Little Question Thread
#4263
I have made a DIY post about the DDM HID's Fogs and Low Beam HID installation
It can be found here
https://g35driver.com/forums/lightin...ml#post5943539
Hope it helps
It can be found here
https://g35driver.com/forums/lightin...ml#post5943539
Hope it helps
The following users liked this post:
Roh (06-16-2011)
#4264
#4265
#4269
Alright fellas, i'm looking for the reflector lenses for the turn signals in my headlights! Striking out searching, maybe someone can link me?
And the outer lenses to my headlights are showing their age big time...I'm considering purchasing the ebay black headlights and i'm just wondering if the tops lenses are direct replacements....Link http://cgi.ebay.com/ebaymotors/03-04...#ht_4665wt_940
I'm aware they're not HID
And the outer lenses to my headlights are showing their age big time...I'm considering purchasing the ebay black headlights and i'm just wondering if the tops lenses are direct replacements....Link http://cgi.ebay.com/ebaymotors/03-04...#ht_4665wt_940
I'm aware they're not HID
#4270
^Did you mean to say projector lenses for your turn signal?
If so, bad news, you're going to have a really really hard time finding them.
05/06 headlights have a 2.5" diameter hole there, and it's easy to find 2.5" projectors.
The 03/04 have a 2.25" and I'm not aware of ANY projector lenses that size.
My solution was to make some out of acrylic. G35Papa used smaller projectors and put trim rings around them. Someone else (can't remember who) ground down 2.5" projectors until they fit ()
The ebay lenses aren't a perfect fit onto the OEM housings, and will require a lot of sealing.
If so, bad news, you're going to have a really really hard time finding them.
05/06 headlights have a 2.5" diameter hole there, and it's easy to find 2.5" projectors.
The 03/04 have a 2.25" and I'm not aware of ANY projector lenses that size.
My solution was to make some out of acrylic. G35Papa used smaller projectors and put trim rings around them. Someone else (can't remember who) ground down 2.5" projectors until they fit ()
The ebay lenses aren't a perfect fit onto the OEM housings, and will require a lot of sealing.
#4273
Registered User
iTrader: (85)
Vivek was the first I think to do the projector mod. He had it glued on the outside of the turn signal bezel. I copied it.
I winded up buying a set of fog/driving lights and hacked them up...cut a circle big enough to fit them behind the OEM turn signal lense so there is still part of the lense there, just painted black along with the bezel.
I winded up buying a set of fog/driving lights and hacked them up...cut a circle big enough to fit them behind the OEM turn signal lense so there is still part of the lense there, just painted black along with the bezel.