New fad. Herra sunk bumper
#47
#49
#51
ill Sedan
iTrader: (87)
#52
#53
^Yeah, that's way way too much.
I got it done for a LOT less (granted, the shop's manager is a friend )
And yes, I'm a "close enough" approximation. HikkataDori front + 05/06 rear + splash-guards
Nice looking out Marcus and Wayne.
Here's a couple mo-betta pics:
http://www.nfspmotorsports.com/forum...em.php?id=1598
http://www.nfspmotorsports.com/forum...em.php?id=1597
http://www.nfspmotorsports.com/forum...em.php?id=1596
I got it done for a LOT less (granted, the shop's manager is a friend )
And yes, I'm a "close enough" approximation. HikkataDori front + 05/06 rear + splash-guards
Nice looking out Marcus and Wayne.
Here's a couple mo-betta pics:
http://www.nfspmotorsports.com/forum...em.php?id=1598
http://www.nfspmotorsports.com/forum...em.php?id=1597
http://www.nfspmotorsports.com/forum...em.php?id=1596
#55
^That's correct.
I wouldn't mind a set of Nismo sides, but that will be later. I have more pressing needs LOL.
The paint on the very front part (the part inside the wheel well) has taken a beating, but the rest of the side skirt is perfectly fine, even way up by the front tire.
It's just that part that actually goes inside the wheel well itself that's damaged.
I'm thinking I just need to mask it off and paint that black anyway.
I wouldn't mind a set of Nismo sides, but that will be later. I have more pressing needs LOL.
The paint on the very front part (the part inside the wheel well) has taken a beating, but the rest of the side skirt is perfectly fine, even way up by the front tire.
It's just that part that actually goes inside the wheel well itself that's damaged.
I'm thinking I just need to mask it off and paint that black anyway.
#56
#57
^eBay for the bumper
Skin and license plate holder + those lower parts you were talking about (FSM calls them "mudguards" even though they aren't )
The foam underneath may have to be trimmed a little.
I got the "mudguards" from a junkyard on ebay too.
Here's more details: http://www.nfspmotorsports.com/forum...php?topic=28.0
Skin and license plate holder + those lower parts you were talking about (FSM calls them "mudguards" even though they aren't )
The foam underneath may have to be trimmed a little.
I got the "mudguards" from a junkyard on ebay too.
Here's more details: http://www.nfspmotorsports.com/forum...php?topic=28.0
#58
#59
[QUOTE=NFSP G35;5773343The paint on the very front part (the part inside the wheel well) has taken a beating, but the rest of the side skirt is perfectly fine, even way up by the front tire.
It's just that part that actually goes inside the wheel well itself that's damaged.
I'm thinking I just need to mask it off and paint that black anyway.[/QUOTE]
I have 05/06 splash on the front of my 03, but splash won't fit the Stillen rear lip I have. What I did to avoid the chipping issue was to use heavy duty 2" wide black vinyl on the portion of the lip that's within firing distance of rocks and debris. My car drove through a pretty brutal Midwest winter and the vinyl is unscathed.
Wrapped my grill in black vinyl too. It holds up far better than the black paint did.
It's just that part that actually goes inside the wheel well itself that's damaged.
I'm thinking I just need to mask it off and paint that black anyway.[/QUOTE]
I have 05/06 splash on the front of my 03, but splash won't fit the Stillen rear lip I have. What I did to avoid the chipping issue was to use heavy duty 2" wide black vinyl on the portion of the lip that's within firing distance of rocks and debris. My car drove through a pretty brutal Midwest winter and the vinyl is unscathed.
Wrapped my grill in black vinyl too. It holds up far better than the black paint did.
#60