G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

HP Blues with Tein S-techs

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 09-18-2011 | 05:17 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
HP Blues with Tein S-techs

Thinking of buying these....what do you guys think of this set up?
 
  #2  
Old 09-18-2011 | 05:19 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
i just hit 90k, i'm in need of strut replacement. I also wanna lower the G as well...what do you guys think or a recommended set up?
 
  #3  
Old 09-18-2011 | 05:36 PM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
would be a good setup, get the ones made for the 350z
 
  #4  
Old 09-18-2011 | 05:46 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
Ride quality is better with the 350z ones?
 
  #5  
Old 09-18-2011 | 05:47 PM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
will be the same, 350z ones will get you an additional 1/2" lower
 
  #6  
Old 09-18-2011 | 05:49 PM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
then you can get 350z s-techs like me and enjoy the much better spring rates
 
  #7  
Old 09-18-2011 | 06:56 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
So 350z HP blues, with the 350z s techs? So the car would drop around 2" then? That's not bad at all.
 

Trending Topics

  #8  
Old 09-18-2011 | 06:59 PM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
Yea somewhere around there, you can check out the drop on my car in my garage...just ignore my rear flared fenders, i was running wider rims a while back
 
  #9  
Old 09-18-2011 | 07:04 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
Nice. Says you have a camber kit too, would I need this? Or were you preparing for coils?
 
  #10  
Old 09-18-2011 | 07:12 PM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
Yea you'll need a rear camber kit, mandatory...after the drop i was almost -4 camber and eating through my tires before i got one...front can still get in spec without one
 
  #11  
Old 09-18-2011 | 07:14 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
So recommend getting a rear camber kit? Spc one then if i do
 
  #12  
Old 09-18-2011 | 07:15 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
And thanks appreciate the advice.
 
  #13  
Old 09-18-2011 | 07:16 PM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
yea you will have to get one, and definitely spc
 
  #14  
Old 09-18-2011 | 07:23 PM
jimmyboi860's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
ok so im going to order 350z hp blues, with 350z s techs, and spc rear cambers. correct?
 
  #15  
Old 09-18-2011 | 07:24 PM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
exactly, you may be able to find those springs used over on my350z for 100 bucks less unless you want new
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: HP Blues with Tein S-techs



All times are GMT -4. The time now is 10:46 AM.