~TunerMax's Custom Gauge Face ~
#1
~TunerMax's Custom Gauge Face ~
Just wanted to share with you guys, after a couple months of testing/changing I finally got the gauge face put together.
I just got it in hand today, and I look forward to finishing the mad-man LED work behind it soon, see THIS THREAD for that on-going fiasco.
The final design before print
You'll note the 'ghosted' Mt.Fuji logos in the Speedo/Tach, these will only be visible when the lights are on. The other Mt.Fuji at the bottom will only be visible during the daytime, and NOT when lights are on:
Hard Copy, with protective cover on:
Undressing, the finish is HIGH GLOSS Piano Black:
The "ghosted" Mt.Fuji logo's won't be visible when the lights are off, you can see them in the pic because the cardboard is right against the face, once mounted you won't see that.
UPDATED FULL PRELIM VIDEO:
I just got it in hand today, and I look forward to finishing the mad-man LED work behind it soon, see THIS THREAD for that on-going fiasco.
The final design before print
You'll note the 'ghosted' Mt.Fuji logos in the Speedo/Tach, these will only be visible when the lights are on. The other Mt.Fuji at the bottom will only be visible during the daytime, and NOT when lights are on:
Hard Copy, with protective cover on:
Undressing, the finish is HIGH GLOSS Piano Black:
The "ghosted" Mt.Fuji logo's won't be visible when the lights are off, you can see them in the pic because the cardboard is right against the face, once mounted you won't see that.
UPDATED FULL PRELIM VIDEO:
Last edited by TunerMax; 04-27-2012 at 06:52 PM.
#3
ill Sedan
iTrader: (87)
The following users liked this post:
TunerMax (04-10-2012)
#5
I didn't want a red-line actually. I'm doing a colour-changing LED job on this and about half the colours will not show the redline if it was printed on. It'll just be a 'blacked out' area.
That, and my redline is never used, and when I get to the point where I'm using the full RPM range, it won't be a stock redline anyways.
#12
The most difficult part was I was stuck on, and wanted the block style notches, and he had to make that from scratch.
I don't think he regrets doing it though, especially considering how good it turned out