G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Wanna enjoy my G

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Dec 2, 2012 | 04:46 PM
  #1  
TeamKing's Avatar
Thread Starter
|
Registered User
Joined: Dec 2012
Posts: 5
Likes: 0
Angry Wanna enjoy my G

I jus purchased a 2004 g35 sedan awd for my wife . The motor feels great but I herd noises in the front end so I took off the wheels to check it out and instantly went into a rage . Biggest hack job I have ever seen ex. Lug nut stripped on to the tie rod end . I paid. For all new plastic inner wheel well and under the front they zip tied them on ...lol. But I can't afford to buy another car and I really like how the engine feels plus it only has 83000 miles . What I'm lookin for are some secrets (not hacking or rigging) I see alotta people using z350 parts.and it's all wheel drive the sway bar in the front was broke loose and the tire is pushed back (I'm figuring I need a lower control arm to get started ). I really like this car and I'm determined to make it nice I want to put sport suspension and some nice wheels any adviice would be usefully ?
 
Reply
Old Dec 2, 2012 | 05:29 PM
  #2  
Adil_G35's Avatar
Registered User
iTrader: (3)
Joined: Mar 2011
Posts: 1,260
Likes: 56
From: Houston, Tx
350z*** lol

if i were you id skip the sport suspension and go for a coilover setup. You'll be amazed on how much it will reduce body roll. And as far as wheels if you are on the stock 17's its a nice cheap upgrade to get the 18 rays for the sedan. Put a spacer on there and it'll look real clean. But if you want to go and get aftermarket wheels you have to answer some questions like:

what size wheels do you want(17,18, 19, 20)?
whats your budget for just 4 wheels(excluding tires)?
do you want an aggressive setup or conservative? <---this will determine what offset you will be getting on your wheels.
How low do you plan on going? <----if you are going for a conservative setup, its important to balance function and form

One thing to add, if you get coilovers be sure to get camber kits for the front and rear or you'll be eating tires like crazy. Keep in mind that "nice" wheels are subjective. What is nice to you might not be nice to someone else. We can't tell you what to get, we can only tell you what we like. Happy modding
You'll love the bug bite
 
Reply
Old Dec 2, 2012 | 06:25 PM
  #3  
PAIXAO's Avatar
Registered User
iTrader: (14)
Joined: Sep 2008
Posts: 8,338
Likes: 445
From: The Commonwealth
Rule #1

Never hook up the wife's car unless you're ok with the attention that will come with it.
 
Reply
Old Dec 2, 2012 | 07:34 PM
  #4  
AARONHL's Avatar
Registered User
iTrader: (15)
Joined: Oct 2007
Posts: 4,334
Likes: 121
From: ɷCONNECTICUTɷ
Originally Posted by TeamKing
ex. Lug nut stripped on to the tie rod end .
What?? Please step away from the car....
 
Reply
Old Dec 2, 2012 | 09:54 PM
  #5  
Adil_G35's Avatar
Registered User
iTrader: (3)
Joined: Mar 2011
Posts: 1,260
Likes: 56
From: Houston, Tx
^^ also a bit stumped on that but i think he means something else. Lug nut goes on the wheel so how does a lug nut go on a tie rod? lmao
 
Reply
Old Dec 3, 2012 | 05:39 AM
  #6  
TurTLe*'s Avatar
Registered User
15 Year Member
Liked
iTrader: (48)
Joined: Feb 2008
Posts: 2,331
Likes: 62
From: Chicago
assuming he meant nut. i still dont know WTF he means. I wanna say he is just bitching about stripped lug nuts. Because not many reasons for one to strip a tie rod end castle nut.

Stripped lug nuts COMMON.
broken splash shield/engine cover COMMON. zip tie part COMMON
fender liner... well not common but ebay has them for cheap no big deal
http://www.ebay.com/itm/RIGHT-SIDE-0...30863a&vxp=mtr

when it comes to cars, you might need to hack/rig things up but that doesn't mean your safety is in jeopardy. You didn't need a fender liner or splash shield. Lug nut, replace the stud and nut if its bad.

If your sway bar in the front BROKE, then take it off. If your end links broke, then replace the end links. a SWAY bar will not cause your wheel to be pushed in. You might have a accident car with a bad control arm or upper A-ARM.

Take pictures and pick up some of the car lingo. Most of us here will be able to help you. Or aleast get you better pricing on things.
 
Reply
Old Dec 3, 2012 | 09:55 AM
  #7  
Mustang5L5's Avatar
Registered User
iTrader: (1)
Joined: Jul 2005
Posts: 8,818
Likes: 468
From: Taxachusetts
I'm a little confused here. What's the question?
 
Reply
Old Dec 3, 2012 | 10:49 AM
  #8  
That's G's Avatar
Registered User
iTrader: (5)
Joined: Jan 2012
Posts: 652
Likes: 54
From: OC, SoCal
Originally Posted by Mustang5L5
I'm a little confused here. What's the question?
Questions are generally denoted by a question mark...

Originally Posted by TeamKing
I really like this car and I'm determined to make it nice I want to put sport suspension and some nice wheels any advice would be usefully ?
He's asking for suspension and wheel advice.
 
Reply
Old Dec 3, 2012 | 11:00 AM
  #9  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
Since you like your car locate an independent brake/alignment shop and have the worn parts replaced. They can also add the pushpins to replace the zip ties....Gary
 
Reply
Old Dec 9, 2012 | 06:14 PM
  #10  
TeamKing's Avatar
Thread Starter
|
Registered User
Joined: Dec 2012
Posts: 5
Likes: 0
I'm very capable of replacing parts sway bar ends and such . And yes a lug nut stripped on to the tie rod . I'm getting it put on a frame machine this week jus to make shur I have a solid base and I will build a bad *** car from there . As for don't hook up the wives car why? It makes it easier on me I got a truck that I love takin to the car show I would love getting her involved . When we met she knew nothin about the woods now she has a 4x4 4wheeler badder than most men. My question was what suspension parts and so on will fit from a 350z?
 
Reply
Old Dec 9, 2012 | 08:18 PM
  #11  
5150DS's Avatar
Registered User
iTrader: (1)
Joined: Aug 2005
Posts: 3,984
Likes: 162
From: So Cal
Since when do you put lug nuts on tie rods?
 
Reply
Old Dec 9, 2012 | 09:46 PM
  #12  
TeamKing's Avatar
Thread Starter
|
Registered User
Joined: Dec 2012
Posts: 5
Likes: 0
Stripped ones at that ...wow
 
Reply
Old Dec 9, 2012 | 10:49 PM
  #13  
bluedevils95's Avatar
Registered User
iTrader: (6)
Joined: Dec 2008
Posts: 19,624
Likes: 577
From: Torrance, CA
Well, hope you get everything worked out. And does she want to get involved if you hook up her car?
 
Reply
Old Dec 10, 2012 | 02:02 AM
  #14  
TeamKing's Avatar
Thread Starter
|
Registered User
Joined: Dec 2012
Posts: 5
Likes: 0
She will go any way ,I jus think it sexier when a women has a hot car.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
Frankieg35
Audio, Video & Electronics
12
Oct 7, 2015 10:22 AM
NewRider
New Members Check In
1
Sep 17, 2015 03:57 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 02:48 PM.