I have an Evap System Question

On the sedan rear right ( other side of muffler) there's the evap canister on the outside there's a plastic cover to cover the canister while removing that cover 4 bolts to replace the Vent Valve all bolts broke.

Does anyone know the part numbers for the mounting brackets so I can replace them and put that cover back on to shield the Evap Canister.

While im at it I may just replace the canister too.

If not, Ill try to drill them out and just put 4 screws.

I haven't removed the canister yet because im scared ill brake more bolts. don't want to attempt without new brackets or other options.
Thank you all in advance.

 

Hunt around here, great resource for part numbers.

https://infiniti.7zap.com/en/us/g35+...35/12+411+608/

 

thank you.

I see section 223 where the canister is but I can’t seem to find all the brackets that the canister bolts on to and the brackets that the cover/trim panel bolts to that protects the canister. Canister area has a bit of rust, just brackets, body is good and I’m happy about that.

I’m rebuilding my g35 so I kind of want to replace all the rusted brackets under the car.

I already replaced/upgraded all the brackets under the car except the canister area.

new engine/trans, exhaust, upgraded fuel system. All damaged shields etc.
she almost a new car now

ill keep looking.

 

You might have to cable tie that cover back on. Thomas & Betts makes some excellent heavy duty UV resistant ty raps that are 18" long that I would be perfectly comfortable using for something like that.

 

that will be my last option.

im still going to find usable brackets somewhere.
I may be able to clean up mine I hope if I can’t find new ones